R0000574 Fit Motor and Swarf Chute : Différence entre versions

[version en cours de rédaction][version en cours de rédaction]
Ligne 25 : Ligne 25 :
  
 
Standard taps  
 
Standard taps  
 +
 +
Ratchet 3/8 drive and 13mm socket 
 +
 +
Copper/hide hammer 
  
  
Ligne 53 : Ligne 57 :
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
−
|Step_Title=<translate>Fit Infill panel to chute</translate>
+
|Step_Title=<translate>Fit Saw cut sensors</translate>
−
|Step_Content=<translate>Fit D0005628 Saw chute infill panel to H0004637 Offcut Chute
+
|Step_Content=<translate>Fit 3 off saw cut sensors from electrical dept. 
 +
 
 +
 
 +
Ensure orientated as shown 
 +
 
 +
 
 +
Labelled as
 +
 
 +
 
 +
X208
 +
 
 +
X209
 +
 
 +
X269
 +
 
 +
 
 +
Use test box to set
 +
 
 +
 
 +
X208 at home position. Cylinder contracted
 +
 
 +
 
 +
X209 Saw cut out position. Cylinder extended, use air to lift head
 +
 
  
 +
X269 Saw mid switch . Set this in the middle of the 2 previous fitted sensors
  
−
Fasteners required with drilling method</translate>
+
<br /></translate>
−
|Step_Picture_00=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-10-19_134408.png
+
|Step_Picture_00=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125003.png
 +
|Step_Picture_00_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":0,"top":0,"width":505,"height":627,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1.19,"scaleY":1.19,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/a/a4/R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125003.png","filters":[]},{"type":"textbox","version":"2.4.6","originX":"center","originY":"center","left":238.96,"top":249.74,"width":47.8,"height":22.6,"fill":"#FF0000","stroke":"#FF0000","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":2.84,"scaleY":2.84,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"X208","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"styles":{} },{"type":"textbox","version":"2.4.6","originX":"center","originY":"center","left":259.61,"top":575.09,"width":47.8,"height":22.6,"fill":"#FF0000","stroke":"#FF0000","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":2.79,"scaleY":2.79,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"X209","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"styles":{} },{"type":"textbox","version":"2.4.6","originX":"center","originY":"center","left":246.58,"top":427.62,"width":47.8,"height":22.6,"fill":"#FF0000","stroke":"#FF0000","strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":2.66,"scaleY":2.66,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"X269","fontSize":20,"fontWeight":"normal","fontFamily":"sans-serif","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"minWidth":20,"styles":{} }],"height":745,"width":600}
 +
|Step_Picture_01=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125155.png
 +
|Step_Picture_02=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125209.png
 +
|Step_Picture_03=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125249.png
 +
|Step_Picture_04=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125254.png
 +
|Step_Picture_05=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125259.png
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step
Ligne 74 : Ligne 108 :
 
<br /></translate>
 
<br /></translate>
 
|Step_Picture_00=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-10-19_135249.png
 
|Step_Picture_00=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-10-19_135249.png
 +
}}
 +
{{Tuto Step
 +
|Step_Title=<translate>Fit Infill panel to chute</translate>
 +
|Step_Content=<translate>Fit D0005628 Saw chute infill panel to H0004637 Offcut Chute
 +
 +
Use M6 x 10 pointed grubscrews in infill section to use as markers
 +
 +
Position as shown
 +
 +
Use M6 x 12 socket caps with M6 A form washers to fix</translate>
 +
|Step_Picture_00=R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125436.png
 +
|Step_Picture_00_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":0,"top":0,"width":508,"height":640,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1.18,"scaleY":1.18,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/e/e7/R0000574_Fit_Motor_and_Swarf_Chute_Screenshot_2023-11-20_125436.png","filters":[]},{"type":"wfnumberedbullet","version":"2.4.6","originX":"left","originY":"top","left":322,"top":361,"width":25,"height":25,"fill":"rgb(0,0,0)","stroke":"#FF0000","strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"objects":[{"type":"circle","version":"2.4.6","originX":"center","originY":"center","left":0,"top":0,"width":24,"height":24,"fill":"#FF0000","stroke":null,"strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"radius":12,"startAngle":0,"endAngle":6.283185307179586},{"type":"text","version":"2.4.6","originX":"center","originY":"center","left":0,"top":0,"width":7.79,"height":15.82,"fill":"rgba(255,255,255,255)","stroke":null,"strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"1","fontSize":14,"fontWeight":"normal","fontFamily":"arial","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"styles":{} }],"number":1}],"height":756,"width":600}
 
}}
 
}}
 
{{Tuto Step
 
{{Tuto Step

Version du 20 novembre 2023 à 13:57

Details for fitting motor and swarf chute

Auteur avatarGareth Green | Dernière modification 4/09/2024 par Gareth Green en cours de rédaction

Difficulté
Moyen
Durée
2 heure(s)

Details for fitting motor and swarf chute

Difficulté
Moyen
Durée
2 heure(s)

Introduction

Tools Required


standard hex keys

Standard spanner set

1 meter steel rule

Copper slip

Chute flap template jig

Standard Hss drills

Standard taps

Ratchet 3/8 drive and 13mm socket

Copper/hide hammer


Parts Required

B0000048 Taperlock Set SPZ 80-2 1210-24 x 1

B0001175 Saw V-belt (special size 987mm) for 500mm blade x 2

D0005628 Saw chute infill panel x 1

H0004637 Offcut Chute (5333) x 1

H0004660 Chute Bracket x 1

P0000609 Reed Switch Mount (Tie Bar) x 3

Étape 1 - Unless otherwise stated

All bolts to have Loctite 243 adhesive applied unless otherwise stated

All Threaded Pneumatic connections to have Loctite 570 applied

All bolts to be pen marked once adhesive applied and correct tension added

R0015086 Assemble Pneumatics on to electrical cabinet loctite 243.png



Étape 2 - Fit Saw cut sensors

Fit 3 off saw cut sensors from electrical dept.


Ensure orientated as shown


Labelled as


X208

X209

X269


Use test box to set


X208 at home position. Cylinder contracted


X209 Saw cut out position. Cylinder extended, use air to lift head


X269 Saw mid switch . Set this in the middle of the 2 previous fitted sensors


R0000574 Fit Motor and Swarf Chute Screenshot 2023-11-20 125155.png
R0000574 Fit Motor and Swarf Chute Screenshot 2023-11-20 125209.png
R0000574 Fit Motor and Swarf Chute Screenshot 2023-11-20 125249.png
R0000574 Fit Motor and Swarf Chute Screenshot 2023-11-20 125254.png

Étape 3 - Fit motor

Fit pre assembled motor to head assembly


Fix with......

R0000574 Fit Motor and Swarf Chute Screenshot 2023-10-19 135212.png



Étape 4 - Attach anaconda assembly

Attach saw motor anaconda to frame


R0000574 Fit Motor and Swarf Chute Screenshot 2023-10-19 135249.png



Étape 5 - Fit Infill panel to chute

Fit D0005628 Saw chute infill panel to H0004637 Offcut Chute

Use M6 x 10 pointed grubscrews in infill section to use as markers

Position as shown

Use M6 x 12 socket caps with M6 A form washers to fix



Étape 6 - Fit pulley and belts

Fit pulley to saw motor ensure copper slip is used on taper lock grubscrews


fit 2 off belts


Align both pulleys with steel rule


Ensure pulleys align belts to centre of belt tensioner

R0000574 Fit Motor and Swarf Chute Screenshot 2023-10-19 135317.png



Étape 7 - Fit chute support

Fit chute support to head assembly


Fixings ......

R0000574 Fit Motor and Swarf Chute Screenshot 2023-10-19 135400.png



Étape 8 - Fit chute

Fit swarf chute with M5 x 10 button hex heads

R0000574 Fit Motor and Swarf Chute Screenshot 2023-10-19 135434.png



Étape 9 - Align swarf chute and finalise

Adjust chute support so chute sits parallel to blade


Mark through 2 off M6 tapped holes on chute support bracket onto swarf chute


Remove swarf chute , drill 6.5mm diameter clearance holes


Refit swarf chute and secure with M6 x 10 button sockets

R0000574 Fit Motor and Swarf Chute Screenshot 2023-10-19 135556.png



Étape 10 - Check spindle clearance

Check spindle clearance once chute is fixed.


Hex head on spindle should clear swarf chute on all points of travel

R0000574 Fit Motor and Swarf Chute Screenshot 2023-10-19 135532.png



Commentaires

Draft

Récupérée de « https://stuga.dokit.app/w/index.php?title=R0000574_Fit_Motor_and_Swarf_Chute&oldid=12152 »
© 2017 - 2024 Dokit, SAS.