R0000574 Fit Motor and Swarf Chute : Différence entre versions

[version en cours de rédaction]

Version du 19 octobre 2023 à 14:42

Details for fitting motor and swarf chute

Difficulté

Moyen

Durée

2 heure(s)

Details for fitting motor and swarf chute

Difficulté

Moyen

Durée

2 heure(s)

Tools Required

standard hex keys

Standard spanner set

1 meter steel rule

Copper slip

Chute flap template jig

Standard Hss drills

Standard taps

Parts Required

B0000048 Taperlock Set SPZ 80-2 1210-24 x 1

B0001175 Saw V-belt (special size 987mm) for 500mm blade x 2

D0005628 Saw chute infill panel x 1

H0004637 Offcut Chute (5333) x 1

H0004660 Chute Bracket x 1

P0000609 Reed Switch Mount (Tie Bar) x 3

All bolts to have Loctite 243 adhesive applied unless otherwise stated

All Threaded Pneumatic connections to have Loctite 570 applied

All bolts to be pen marked once adhesive applied and correct tension added

Fit D0005628 Saw chute infill panel to H0004637 Offcut Chute

Fasteners required with drilling method

en none 0 Draft

@@ Ligne 12 : / Ligne 12 : @@
-'''<u>Parts Required</u>'''</translate>
+standard hex keys
+Standard spanner set
+meter steel rule
+Copper slip
+Chute flap template jig
+Standard Hss drills
+Standard taps
+'''<u>Parts Required</u>'''
+B0000048 Taperlock Set SPZ 80-2 1210-24 x 1
+B0001175 Saw V-belt (special size 987mm) for 500mm blade x 2
+D0005628 Saw chute infill panel  x 1
+H0004637 Offcut Chute (5333) x 1
+H0004660 Chute Bracket x 1
+P0000609 Reed Switch Mount (Tie Bar) x 3</translate>
 }}
 {{Materials}}
 {{EPI}}
 {{Tuto Step
-|Step_Title=<translate></translate>
+|Step_Title=<translate>Unless otherwise stated</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>All bolts to have Loctite 243 adhesive applied unless otherwise stated
+All Threaded Pneumatic connections to have Loctite 570 applied
+All bolts to be pen marked once adhesive applied and correct tension added</translate>
+|Step_Picture_00=R0015086_Assemble_Pneumatics_on_to_electrical_cabinet_loctite_243.png
+}}
+{{Tuto Step
+|Step_Title=<translate>Fit Infill panel to chute</translate>
+|Step_Content=<translate>Fit D0005628 Saw chute infill panel to H0004637 Offcut Chute
+Fasteners required with drilling method</translate>
 }}
 {{Notes}}
 {{PageLang
+|Language=en
 |SourceLanguage=none
 |IsTranslation=0
-|Language=en
 }}
 {{Tuto Status
 |Complete=Draft
 }}