Installation Procedure - Autoflow Mk4 : Différence entre versions

[version en cours de rédaction]

Version actuelle datée du 18 août 2023 à 23:55

Installation procedure for Autoflow Mk4

Auteur Gareth Green | Dernière modification 18/08/2023 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽

Difficulté

Difficile

Durée

3 jour(s)

Installation procedure for Autoflow Mk4

Difficulté

Difficile

Durée

3 jour(s)

Sommaire

1 Introduction
2 Étape 1 - Prepare Area
3 Étape 2 - Unload from Transport
4 Étape 3 - Locate and level infeed table
5 Étape 4 - Locate, level and align machining module
6 Étape 5 - Reattach Eject system
7 Étape 6 - Locate, level and align outfeed table
8 Étape 7 - Fix to floor
9 Étape 8 - Locate waste conveyor system
10 Étape 9 - Guard fencing assembly
11 Étape 10 - Connect Services
12 Commentaires

Introduction

General Procedure is

Prepare Area
Unload from Transport
Locate and level infeed table
Locate, level and align machining module
Locate, level and align outfeed table
Fix to floor
Locate waste conveyor system
Guard fencing assembly

Utiliser des chaussures de protection

Étape 1 - Prepare Area

Étape 2 - Unload from Transport

Étape 3 - Locate and level infeed table

Étape 4 - Locate, level and align machining module

Machining centre distance to infeed between frames =

Étape 5 - Reattach Eject system

...Check the datum sensor gap is 0.5-1mm from the carriage for reliable datuming

Étape 6 - Locate, level and align outfeed table

Machining centre to outfeed distance between frames =

Étape 7 - Fix to floor

Étape 8 - Locate waste conveyor system

Étape 9 - Guard fencing assembly

Étape 10 - Connect Services

Commentaires

en none 0 Draft

@@ Ligne 1 : / Ligne 1 : @@
 {{Tuto Details
+|Main_Picture=Installation_Procedure_-_Autoflow_Mk4_MK4_Autoflow.jpg
+|Main_Picture_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":-29,"top":-7,"width":11608,"height":8708,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.05,"scaleY":0.05,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/0/09/Installation_Procedure_-_Autoflow_Mk4_MK4_Autoflow.jpg","filters":[]}],"height":450,"width":600}
 |Description=<translate>Installation procedure for Autoflow Mk4</translate>
 |Categories=Maintenance
@@ Ligne 36 : / Ligne 38 : @@
 {{Tuto Step
 |Step_Title=<translate>Locate, level and align machining module</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>Machining centre distance to infeed between frames =</translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Reattach Eject system</translate>
+|Step_Content=<translate>{{Warning|...Check the datum sensor gap is 0.5-1mm from the carriage for reliable datuming}}</translate>
 }}
 {{Tuto Step
 |Step_Title=<translate>Locate, level and align outfeed table</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>Machining centre to outfeed distance between frames =</translate>
 }}
 {{Tuto Step
@@ Ligne 60 : / Ligne 66 : @@
 {{Notes}}
 {{PageLang
+|Language=en
 |SourceLanguage=none
 |IsTranslation=0
-|Language=en
 }}
 {{Tuto Status
 |Complete=Draft
 }}