R0015063 Bench Assemble Roller Tables : Différence entre versions

[version en cours de rédaction]

Version du 4 juillet 2023 à 08:31

Instructions to bench assemble roller tables

Pas encore d'image

Difficulté

Moyen

Durée

6 heure(s)

Instructions to bench assemble roller tables

Difficulté

Moyen

Durée

6 heure(s)

...All Flow regulator fittings P0001198 should be set at this point to the correct flow rate. To do this follow these steps

1 Wind regulation screw clockwise until fully in. Do not overtighten, stop when light resistance is felt.

2 Turn regulation screw exactly 2.5 turns anticlockwise to set flow rate

en none 0 Draft

@@ Ligne 16 : / Ligne 16 : @@
 {{Tuto Step
 |Step_Title=<translate></translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>{{Info|...All Flow regulator  fittings P0001198 should be set at this point to the correct flow rate. To do this follow these steps
+  Wind regulation screw clockwise until fully in. Do not overtighten, stop when light resistance is felt.
+  Turn regulation screw exactly 2.5 turns anticlockwise to set flow rate}}</translate>
 }}
 {{Tuto Step
@@ Ligne 52 : / Ligne 56 : @@
 {{Notes}}
 {{PageLang
+|Language=en
 |SourceLanguage=none
 |IsTranslation=0
-|Language=en
 }}
 {{Tuto Status
 |Complete=Draft
 }}