(Page créée avec « {{Tuto Details |Description=<translate>Generate a backup image of the Front End PC to extra Hard disk</translate> |Difficulty=Easy |Duration=20 |Duration-type=minute(s) |T... ») |
(Aucune différence)
|
Version actuelle datée du 17 mai 2023 à 14:10
Generate a backup image of the Front End PC to extra Hard disk
Difficulté
Facile
Durée
20 minute(s)
Introduction
Each CNC PC comes with a USB Backup Stick.
This is for those machines that have an Extra disk (D:) (normally used for the Virtual PC)Étape 1 - Imaging
- Put USB stick in PC.
- Power on Press F12 while booting to go into boot mode.
- Select boot option UEFI USB SanDisk
- On First Screen Select Backup.
- De- check the 480GB disk
- Check the one with several partitions.
- Select this disk.
- Select Image this Disk.
- Set destination folder to D:\
- Press Finish.
- It will take 15 to 20 mins.
- Close off Windows
- Remove USB stick
- Re-boot
Draft
Français
English
Deutsch
Español
Italiano
Português