Toshiba - B-EX4T1 Printer Setup : Différence entre versions

[version en cours de rédaction]

Version actuelle datée du 22 mars 2023 à 15:53

B-EX4T1 Printer Setup for Auto Labeling

Auteur Gareth Green | Dernière modification 22/03/2023 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽

Difficulté

Facile

Durée

20 minute(s)

B-EX4T1 Printer Setup for Auto Labeling

Difficulté

Facile

Durée

20 minute(s)

Sommaire

1 Étape 1 - Inner & Outer
2 Étape 2 - Rewind Spool
3 Étape 3 - Printhead access
4 Étape 4 - Setting Rewinder
5 Étape 5 - Label Guides
6 Étape 6 - Sensor Position
7 Étape 7 - Closing Label Head
8 Étape 8 - Connecting printer to PC
9 Étape 9 - Initial Power up
10 Étape 10 - Using BCP to setup the printer
11 Étape 11 - Change Settings
12 Étape 12 - Power printer off and On
13 Étape 13 - Testing
14 Étape 14 - Set the IP Address for the Customers network
15 Commentaires

B-EX4T1, Toshiba

Étape 1 - Inner & Outer

The instructions for both the Inner & Outer wound labels are on the inside of the open lid.

Étape 2 - Rewind Spool

There will be no ribbon and as the settings will be for Peel Off a length of blank backing needs to be fed onto the Rewind spool

Étape 3 - Printhead access

To gain access turn the green knob to FREE. You can then pull the front plate down and lift the printer head up.

Étape 4 - Setting Rewinder

Ensure the switch is set to REWINDER

Étape 5 - Label Guides

With the Printhead open ensure that the labels are under the small black sprung guides. Slide the green guide to the width of the label.

Étape 6 - Sensor Position

Ensure that the sensor head is in the middle of the label

Étape 7 - Closing Label Head

When loaded close the Printhead down, lift the front plate up and turn the green knob to LABEL.

Étape 8 - Connecting printer to PC

For easy setup use a USB cable (Alternatively everything can be done via the network web interface)

1) Connect a USB cable to the PC

2) Connect a Network cable to a live DHCP network to obtain an IP address.

3) Download and install the BCP setup software: https://www.toshibatec.com/download_overseas/printer/setting_tool/BCP_Series/ [1]

Étape 9 - Initial Power up

If the labels have been fitted properly on power up the calibration process will eject several labels.

Take a note of the IP address given to the printer on the front panel.

Étape 10 - Using BCP to setup the printer

When you start BCP you should see as picture

Select USB if not Selected

Étape 11 - Change Settings

Press the Emulation Button and take the top option "Zmode System Parameter Settings"

Then Make the changes

Label Length 38mm (after calibration this will be reset to 41.3)
Label Width 98mm
Ribbon WITHOUT RIBBON
Print mode PEEL OFF
Sensor TRANS PREPRINT
Max Label Length (for calibration) 200mm (this just saves on labels)

Press the DOWNLOAD button and check that there are no errors.

Now on the Toshiba side:

Select Paraeter Settings
Select Standard 2 (General 2 on BCP TOOL)
Adjust Cut Adjust to -2.0
Press the submit button

The screen shows the Web version. The adjustment brings the label forward out of the printer to allow collection by the Picking Arm.

Étape 12 - Power printer off and On

...This is often necessary to make sure the printer returns in emulation mode properly

Étape 13 - Testing

1) Pressing "Feed" should push out another label regardless.

2) Send a label to the printer via the network (or via the Test - Send file within BCP).

3) Send more than one file and make sure that each time you remove a label from the output the next one is presented.

Étape 14 - Set the IP Address for the Customers network

Within BCP choose "Parameter Settings"
Select the LAN tab
Enable TCP/IP
Enable Wired LAN
Set IP Address and Sub Net Mask
Press the Set Parameter at the bottom.

Commentaires

en none 0 Draft

@@ Ligne 15 : / Ligne 15 : @@
 {{EPI}}
 {{Tuto Step
-|Step_Title=<translate>Loading Labels</translate>
+|Step_Title=<translate>Inner & Outer</translate>
-|Step_Content=<translate>1) The instructions for the both Inner & Outter wound labels are on the inside of the open lid.
+|Step_Content=<translate>The instructions for both the Inner & Outer wound labels are on the inside of the open lid.
-) There will be no ribbon and as the seetings will be for Peel Off a length of blank backing needs to be feed onto the Rewind spool
+<br /></translate>
-) To gain access turn the green knob to FREE. You can then pull the front plate down and lift the printer head up.</translate>
 |Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-Lid.jpg
-|Step_Picture_00_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":0,"top":0,"width":3264,"height":2448,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.18,"scaleY":0.18,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/f/f2/Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-Lid.jpg","filters":[]},{"type":"wfnumberedbullet","version":"2.4.6","originX":"left","originY":"top","left":276,"top":145,"width":25,"height":25,"fill":"rgb(0,0,0)","stroke":"#FF0000","strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"objects":[{"type":"circle","version":"2.4.6","originX":"center","originY":"center","left":0,"top":0,"width":24,"height":24,"fill":"#FF0000","stroke":null,"strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"radius":12,"startAngle":0,"endAngle":6.283185307179586},{"type":"text","version":"2.4.6","originX":"center","originY":"center","left":0,"top":0,"width":7.79,"height":15.82,"fill":"rgba(255,255,255,255)","stroke":null,"strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"1","fontSize":14,"fontWeight":"normal","fontFamily":"arial","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"styles":{} }],"number":1}],"height":450,"width":600}
+}}
-|Step_Picture_01=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-Load_New.jpg
+{{Tuto Step
-|Step_Picture_02=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-Rewinder_New.jpg
+|Step_Title=<translate>Rewind Spool</translate>
-|Step_Picture_02_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":0,"top":0,"width":3264,"height":2448,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.18,"scaleY":0.18,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/9/9f/Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-Rewinder_New.jpg","filters":[]},{"type":"wfnumberedbullet","version":"2.4.6","originX":"left","originY":"top","left":464,"top":215,"width":25,"height":25,"fill":"rgb(0,0,0)","stroke":"#FF0000","strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"objects":[{"type":"circle","version":"2.4.6","originX":"center","originY":"center","left":0,"top":0,"width":24,"height":24,"fill":"#FF0000","stroke":null,"strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"radius":12,"startAngle":0,"endAngle":6.283185307179586},{"type":"text","version":"2.4.6","originX":"center","originY":"center","left":0,"top":0,"width":7.79,"height":15.82,"fill":"rgba(255,255,255,255)","stroke":null,"strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"2","fontSize":14,"fontWeight":"normal","fontFamily":"arial","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"styles":{} }],"number":2}],"height":450,"width":600}
+|Step_Content=<translate>There will be no ribbon and as the settings will be for Peel Off a length of blank backing needs to be fed onto the Rewind spool</translate>
-|Step_Picture_03=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-PrinterHead-Readtoopen_New.jpg
+|Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-Rewinder_New.jpg
-|Step_Picture_03_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":0,"top":0,"width":3264,"height":2448,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.18,"scaleY":0.18,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/d/d3/Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-PrinterHead-Readtoopen_New.jpg","filters":[]},{"type":"wfnumberedbullet","version":"2.4.6","originX":"left","originY":"top","left":244,"top":123,"width":25,"height":25,"fill":"rgb(0,0,0)","stroke":"#FF0000","strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"objects":[{"type":"circle","version":"2.4.6","originX":"center","originY":"center","left":0,"top":0,"width":24,"height":24,"fill":"#FF0000","stroke":null,"strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"radius":12,"startAngle":0,"endAngle":6.283185307179586},{"type":"text","version":"2.4.6","originX":"center","originY":"center","left":0,"top":0,"width":7.79,"height":15.82,"fill":"rgba(255,255,255,255)","stroke":null,"strokeWidth":1,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"text":"3","fontSize":14,"fontWeight":"normal","fontFamily":"arial","fontStyle":"normal","lineHeight":1.16,"underline":false,"overline":false,"linethrough":false,"textAlign":"left","textBackgroundColor":"","charSpacing":0,"styles":{} }],"number":3}],"height":450,"width":600}
+}}
+{{Tuto Step
+|Step_Title=<translate>Printhead access</translate>
+|Step_Content=<translate>To gain access turn the green knob to FREE. You can then pull the front plate down and lift the printer head up.</translate>
+|Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-PrinterHead-Readtoopen_New.jpg
 }}
 {{Tuto Step
 |Step_Title=<translate>Setting Rewinder</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>Ensure the switch is set to REWINDER</translate>
 |Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-Rewinder-Switch_New.jpg
 }}
 {{Tuto Step
 |Step_Title=<translate>Label Guides</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>With the Printhead open ensure that the labels are under the small black sprung guides. Slide the green guide to the width of the label.</translate>
-|Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-PrinterHead-Readtoopen_New.jpg
+|Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-LabelGuides_New.jpg
-|Step_Picture_01=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-LabelGuides_New.jpg
-|Step_Picture_02=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-PrintHeadOpen_New.jpg
 }}
 {{Tuto Step
 |Step_Title=<translate>Sensor Position</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>Ensure that the sensor head is in the middle of the label</translate>
 |Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-Sensor_New.jpg
 }}
 {{Tuto Step
 |Step_Title=<translate>Closing Label Head</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>When loaded close the Printhead down, lift the front plate up and turn the green knob to LABEL.</translate>
 |Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-PrintHeadClosed_New.jpg
 }}
 {{Tuto Step
 |Step_Title=<translate>Connecting printer to PC</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>For easy setup use a USB cable (Alternatively everything can be done via the network web interface)
+) Connect a USB cable to the PC
+) Connect a Network cable to a live DHCP network to obtain an IP address.
+) Download and install the BCP setup software: [https://url6.mailanyone.net/scanner?m=1pIYAE-0003U9-3G&d=4%7Cmail%2F90%2F1674147000%2F1pIYAE-0003U9-3G%7Cin6f%7C57e1b682%7C27359798%7C12301058%7C63C975823F8CF099951D682ADAAD7EC2&o=%2Fphtw%3A%2Fwtsbow.thiatsdcecwm%2Fo.ovanlr_oeodissetprna%2Fisergttn%2FeCo_t_%2FBPol%2FseireS&s=uO4_tHdOp9-EM4-X9--MGgLUV_Y https://www.toshibatec.com/download_overseas/printer/setting_tool/BCP_Series/] [https://url6.mailanyone.net/scanner?m=1pIYAE-0003U9-3G&d=4%7Cmail%2F90%2F1674147000%2F1pIYAE-0003U9-3G%7Cin6f%7C57e1b682%7C27359798%7C12301058%7C63C975823F8CF099951D682ADAAD7EC2&o=%2Fphtw%3A%2Fwtsbow.thiatsdcecwm%2Fo.ovanlr_oeodissetprna%2Fisergttn%2FeCo_t_%2FBPol%2FseireS&s=uO4_tHdOp9-EM4-X9--MGgLUV_Y]</translate>
 }}
 {{Tuto Step
 |Step_Title=<translate>Initial Power up</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>If the labels have been fitted properly on power up the calibration process will eject several labels.
+Take a note of the IP address given to the printer on the front panel.</translate>
+|Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-panel_network.jpg
+}}
+{{Tuto Step
+|Step_Title=<translate>Using BCP to setup the printer</translate>
+|Step_Content=<translate>When you start BCP you should see as picture
+Select USB if not Selected</translate>
+|Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_Screenshot_2023-02-06_144308.png
+}}
+{{Tuto Step
+|Step_Title=<translate>Change  Settings</translate>
+|Step_Content=<translate>Press the Emulation Button and take the top option "Zmode System Parameter Settings"
+Then Make the changes
+*Label Length  '''38mm''' (after calibration this will be reset to 41.3)
+*Label Width '''98mm'''
+*Ribbon '''WITHOUT RIBBON'''
+*Print mode '''PEEL OFF'''
+*Sensor  '''TRANS PREPRINT'''
+*Max Label Length (for calibration) '''200mm''' (this just saves on labels)
+Press the '''DOWNLOAD''' button and check that there are no errors.
+Now on the Toshiba side:
+*Select Paraeter Settings
+*Select Standard 2 (General 2 on BCP TOOL)
+*Adjust Cut Adjust to -2.0
+*Press the submit button
+The screen shows the Web version. The adjustment brings the label forward out of the printer to allow collection by the Picking Arm.
+<br /></translate>
+|Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_Screenshot_2023-02-06_144524.png
+|Step_Picture_00_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":0,"top":0,"width":1414,"height":984,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.42,"scaleY":0.42,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/4/4c/Toshiba_-_B-EX4T1_Printer_Setup_Screenshot_2023-02-06_144524.png","filters":[]},{"type":"wfarrow2line","version":"2.4.6","originX":"center","originY":"center","left":112,"top":340,"width":92,"height":16,"fill":"rgba(255,0,0,0)","stroke":"#FF0000","strokeWidth":4,"strokeDashArray":null,"strokeLineCap":"round","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"x1":46,"x2":-46,"y1":-8,"y2":8,"x2a":-24.92503550559653,"y2a":12.45487054353244,"x2b":-27.666494301616492,"y2b":-3.308517533582351},{"type":"wfarrow2circle","version":"2.4.6","originX":"center","originY":"center","left":158,"top":332,"width":16,"height":16,"fill":"#aaa","stroke":"#666","strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":0.5,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"radius":8,"startAngle":0,"endAngle":6.283185307179586},{"type":"wfarrow2circle","version":"2.4.6","originX":"center","originY":"center","left":66,"top":348,"width":16,"height":16,"fill":"#aaa","stroke":"#666","strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":0.5,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"radius":8,"startAngle":0,"endAngle":6.283185307179586}],"height":418,"width":600}
+|Step_Picture_01=Toshiba_-_B-EX4T1_Printer_Setup_Screenshot_2023-02-15_140804.jpg
 }}
 {{Tuto Step
-|Step_Title=<translate>Printer settings</translate>
+|Step_Title=<translate>Power printer off and On</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>{{Info|...This is often necessary to make sure the printer returns in emulation mode properly}}</translate>
 }}
 {{Tuto Step
-|Step_Title=<translate>Testng</translate>
+|Step_Title=<translate>Testing</translate>
-|Step_Content=<translate></translate>
+|Step_Content=<translate>1) Pressing "Feed" should push out another label regardless.
+) Send a label to the printer via the network (or via the  Test - Send file within BCP).
+) Send more than one file and make sure that each time you remove a label from the output the next one is presented.</translate>
 |Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_B-EX4-LabelReadytoPull_New.jpg
+}}
+{{Tuto Step
+|Step_Title=<translate>Set the IP Address for the Customers network</translate>
+|Step_Content=<translate># Within BCP choose "Parameter Settings"
+# Select the LAN tab
+# Enable TCP/IP
+# Enable Wired LAN
+# Set IP Address and Sub Net Mask
+# Press the Set Parameter at the bottom.
+<br /></translate>
+|Step_Picture_00=Toshiba_-_B-EX4T1_Printer_Setup_Screenshot_2023-02-06_150202.png
+|Step_Picture_00_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":0,"top":0,"width":1404,"height":976,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.43,"scaleY":0.43,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/6/6b/Toshiba_-_B-EX4T1_Printer_Setup_Screenshot_2023-02-06_150202.png","filters":[]},{"type":"wfellipse","version":"2.4.6","originX":"center","originY":"center","left":34.1,"top":131.61,"width":64.34,"height":64.34,"fill":"rgba(255,0,0,0)","stroke":"#FF0000","strokeWidth":2,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":1,"scaleY":1,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"rx":32.17048299585881,"ry":32.17048299585881}],"height":417,"width":600}
 }}
 {{Notes}}