WinMulti - Drives : Différence entre versions

[version en cours de rédaction][version en cours de rédaction]
 
(Une révision intermédiaire par le même utilisateur non affichée)
Ligne 1 : Ligne 1 :
 
{{Tuto Details
 
{{Tuto Details
 +
|Main_Picture=Setting_up_TwinCAT_Drive_Manager_for_AX8000_Drives_AX8000_drives.jpg
 +
|Main_Picture_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":39,"top":-36,"width":888,"height":882,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.6,"scaleY":0.6,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/1/14/Setting_up_TwinCAT_Drive_Manager_for_AX8000_Drives_AX8000_drives.jpg","filters":[]}],"height":450,"width":600}
 
|Description=<translate>This Page describes the drives screen in the winMulti Service Menu</translate>
 
|Description=<translate>This Page describes the drives screen in the winMulti Service Menu</translate>
 
|Categories=Operation, Software
 
|Categories=Operation, Software
Ligne 113 : Ligne 115 :
 
===Microline===
 
===Microline===
  
 +
{{#annotatedImageLight:Fichier:WinMulti - Drives DrivesMicroline.jpg|0=997px|hash=|jsondata=|mediaClass=Image|type=frameless|align=default|src=https://stuga.dokit.app/images/a/a2/WinMulti_-_Drives_DrivesMicroline.jpg|href=./Fichier:WinMulti - Drives DrivesMicroline.jpg|resource=./Fichier:WinMulti - Drives DrivesMicroline.jpg|caption=Microline Drives|size=997px}}
 +
 +
{| class="wikitable"
 +
|+Microline Drives
 +
!Drive
 +
!Description
 +
|-
 +
|X Axis
 +
|This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
 +
|-
 +
|Y Axis
 +
|This is the Axis Away and Toward the operator and works from -120 to 120
 +
|-
 +
|Z Axis
 +
|This is the Up and Down axis and works from -120 to 120
 +
|-
 +
|R Axis
 +
|This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
 +
|-
 +
|G Axis
 +
|This is the Gripper Forward/Back Axis and works from 22mm from the back fence to 75mm from the back fence
 +
|-
 +
|A Axis
 +
|This is the Saw Blade axis forward and back which affects cut length on 45 degree pieces and Arrowheads
 +
|}
  
 
===ZX4 Drives===
 
===ZX4 Drives===
 +
{{#annotatedImageLight:Fichier:WinMulti - Drives DrivesZX4.jpg|0=997px|hash=|jsondata=|mediaClass=Image|type=frameless|align=default|src=https://stuga.dokit.app/images/f/f4/WinMulti_-_Drives_DrivesZX4.jpg|href=./Fichier:WinMulti - Drives DrivesZX4.jpg|resource=./Fichier:WinMulti - Drives DrivesZX4.jpg|caption=ZX4 Drives|size=997px}}
 +
 +
 +
{| class="wikitable"
 +
|+ZX4 Drives
 +
!Drive
 +
!Description
 +
|-
 +
|X Axis
 +
|This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
 +
|-
 +
|Y Axis
 +
|This is the Axis Away and Toward the operator and works from -120 to 120
 +
|-
 +
|Z Axis
 +
|This is the Up and Down axis and works from -120 to 120
 +
|-
 +
|R Axis
 +
|This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
 +
|-
 +
|G Axis
 +
|This is the Gripper Forward/Back Axis and works from 22mm from the back fence to 72mm from the back fence
 +
|-
 +
|SX Axis
 +
|This is the Saw Pusher X Axis and works from the end of the bed to the centre of the saw Blade (0 to -6645)
 +
|-
 +
|V Axis
 +
|This is the axis for the front V notch blades and affects the base front notch depth
 +
|-
 +
|W Axis
 +
|This is the axis for the rear V notch blades and affects the base rear notch depth
 +
|}
  
  
 
===ZX5 Drives===
 
===ZX5 Drives===
 
<br />{{#annotatedImageLight:Fichier:WinMulti - Drives DrivesZX5.jpg|0=997px|hash=|jsondata=|mediaClass=Image|type=frameless|align=center|src=https://stuga.dokit.app/images/5/5f/WinMulti_-_Drives_DrivesZX5.jpg|href=./Fichier:WinMulti - Drives DrivesZX5.jpg|resource=./Fichier:WinMulti - Drives DrivesZX5.jpg|caption=ZX5 Drives|size=997px}}<br />
 
<br />{{#annotatedImageLight:Fichier:WinMulti - Drives DrivesZX5.jpg|0=997px|hash=|jsondata=|mediaClass=Image|type=frameless|align=center|src=https://stuga.dokit.app/images/5/5f/WinMulti_-_Drives_DrivesZX5.jpg|href=./Fichier:WinMulti - Drives DrivesZX5.jpg|resource=./Fichier:WinMulti - Drives DrivesZX5.jpg|caption=ZX5 Drives|size=997px}}<br />
−
 
+
{| class="wikitable"
 +
|+ZX5 Drives
 +
!Drive
 +
!Description
 +
|-
 +
|X Axis
 +
|This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
 +
|-
 +
|Y Axis
 +
|This is the Axis Away and Toward the operator and works from -120 to 120
 +
|-
 +
|Z Axis
 +
|This is the Up and Down axis and works from -120 to 120
 +
|-
 +
|R Axis
 +
|This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
 +
|-
 +
|VY Axis
 +
|This is the axis for the V notch Module and affects the base front/rear notch depths
 +
|-
 +
|SX Axis
 +
|This is the Saw Pusher X Axis and works from the end of the bed to the centre of the saw Blade (0 to 7700)
 +
|-
 +
|SY Axis
 +
|This is the Saw Front/Back axis and affects Cut Lengths on 45 degree pieces, Arrowheads and Y Notches
 +
|-
 +
|SR Axis
 +
|This is the Saw Blade Rotation Axis
 +
|}
 +
<br />
 
===Autoflow Drives===
 
===Autoflow Drives===
 
{{#annotatedImageLight:Fichier:WinMulti - Drives DrivesAutoflow.jpg|0=997px|hash=|jsondata=|mediaClass=Image|type=frameless|align=center|src=https://stuga.dokit.app/images/b/b0/WinMulti_-_Drives_DrivesAutoflow.jpg|href=./Fichier:WinMulti - Drives DrivesAutoflow.jpg|resource=./Fichier:WinMulti - Drives DrivesAutoflow.jpg|caption=Autoflow Drives|size=997px}}<br />
 
{{#annotatedImageLight:Fichier:WinMulti - Drives DrivesAutoflow.jpg|0=997px|hash=|jsondata=|mediaClass=Image|type=frameless|align=center|src=https://stuga.dokit.app/images/b/b0/WinMulti_-_Drives_DrivesAutoflow.jpg|href=./Fichier:WinMulti - Drives DrivesAutoflow.jpg|resource=./Fichier:WinMulti - Drives DrivesAutoflow.jpg|caption=Autoflow Drives|size=997px}}<br />
 +
{| class="wikitable"
 +
|+Autoflow Drives
 +
!Drive
 +
!Description
 +
|-
 +
|GX Axis
 +
|This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
 +
|-
 +
|GY Axis
 +
|This is the Gripper Back to Front Axis and works from 20 to 75mm from the back fence
 +
|-
 +
|GZ Axis
 +
|This is the Gripper Up & Down Axis and works from 27 to 100mm above the bed
 +
|-
 +
|Y Axis
 +
|This is the Axis Away and Toward the operator and works from -120 to 120
 +
|-
 +
|Z Axis
 +
|This is the Up and Down axis and works from -120 to 120
 +
|-
 +
|R Axis
 +
|This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
 +
|-
 +
|SY Axis
 +
|This is the Saw Front/Back axis and affects Cut Lengths on 45 degree pieces, Arrowheads and Y Notches
 +
|-
 +
|SZ Axis
 +
|This is the Saw Up/Down axis and affects Cut Height
 +
|-
 +
|SR Axis
 +
|This is the Saw Blade Rotation Axis
 +
|}
  
  

Version actuelle datée du 16 avril 2020 à 11:06

This Page describes the drives screen in the winMulti Service Menu

Auteur avatarStuga Engineer | Dernière modification 16/04/2020 par Stuga Engineer en cours de rédaction


This Page describes the drives screen in the winMulti Service Menu

Drives

The Drives tab allows manipulation of each of the axes. Each Machine type will have different drives as shown below. The manipulation of these can only be performed in Manual Mode, to enter manual mode from the main screen press the STOP Button once.

Saw Drives

Saw Drives
Autocut Drives
Drive Description
GX Axis This is the axis for the saw pusher and works from 7060 (end if the infeed bed) to 0 (Saw Blade)
SR Axis This is the axis for the Saw Blade Rotation and works from 45 to 135 degrees


Axes


+ / - Buttons

Once in Manual Mode tapping on the + and – buttons next to each of the drives will jog the axis in the appropriate direction, and the numbers between the +/- buttons show the current axis position.

Home

Tapping on the Home Button will move the axis back to its home position, as determined in the Settings – Axis screen.

Move & Stop

Type the position required into the Numbers after the Move button. When the move button is then pressed, the drive will attempt to move to the axis position given. Stop can be pressed at any point to halt this movement.

Reverse

The Reverse button reverses the direction of the associated drive.

Numbers

The Numbers after the Reverse button are (In order) Maximum Position, Speed, Acceleration, Deceleration


Speed Override

The speed override slider slows down the motor movements to give the operator time to intervene in diagnostic exercises.

Save

The Save Button saves and setting changes (e.g. Speed Override)

Setup Mode

This puts the machine into setup mode.

Test Printer

This button sends a test label to the printer.

Ecoline

Ecoline Drives
Ecoline Drives
Drive Description
X Axis This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
Y Axis This is the Axis Away and Toward the operator and works from -104 to 119
Z Axis This is the Up and Down axis and works from -114 to 110
G Axis This is the Gripper Forward/Back Axis and works from 23mm from the back fence to 52mm from the back fence
V Axis This is the V Notch Module axis and works from 5 to 250 home position is around 128mm
R Axis This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.


Flowline / ZX3 Drives

Flowline Drives


Flowline Drives
Drive Description
X Axis This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
Y Axis This is the Axis Away and Toward the operator and works from -120 to 120
Z Axis This is the Up and Down axis and works from -120 to 120
R Axis This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
G Axis This is the Gripper Forward/Back Axis and works from 22mm from the back fence to 72mm from the back fence
SX Axis This is the Saw Pusher X Axis and works from the end of the bed to the centre of the saw Blade (0 to -6645)


Microline

Microline Drives
Microline Drives
Drive Description
X Axis This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
Y Axis This is the Axis Away and Toward the operator and works from -120 to 120
Z Axis This is the Up and Down axis and works from -120 to 120
R Axis This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
G Axis This is the Gripper Forward/Back Axis and works from 22mm from the back fence to 75mm from the back fence
A Axis This is the Saw Blade axis forward and back which affects cut length on 45 degree pieces and Arrowheads

ZX4 Drives

ZX4 Drives


ZX4 Drives
Drive Description
X Axis This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
Y Axis This is the Axis Away and Toward the operator and works from -120 to 120
Z Axis This is the Up and Down axis and works from -120 to 120
R Axis This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
G Axis This is the Gripper Forward/Back Axis and works from 22mm from the back fence to 72mm from the back fence
SX Axis This is the Saw Pusher X Axis and works from the end of the bed to the centre of the saw Blade (0 to -6645)
V Axis This is the axis for the front V notch blades and affects the base front notch depth
W Axis This is the axis for the rear V notch blades and affects the base rear notch depth


ZX5 Drives


ZX5 Drives


ZX5 Drives
Drive Description
X Axis This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
Y Axis This is the Axis Away and Toward the operator and works from -120 to 120
Z Axis This is the Up and Down axis and works from -120 to 120
R Axis This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
VY Axis This is the axis for the V notch Module and affects the base front/rear notch depths
SX Axis This is the Saw Pusher X Axis and works from the end of the bed to the centre of the saw Blade (0 to 7700)
SY Axis This is the Saw Front/Back axis and affects Cut Lengths on 45 degree pieces, Arrowheads and Y Notches
SR Axis This is the Saw Blade Rotation Axis


Autoflow Drives

Autoflow Drives


Autoflow Drives
Drive Description
GX Axis This is the Gripper axis along the bar and works from the end of the infeed bed to the centre of the tools on the Ring
GY Axis This is the Gripper Back to Front Axis and works from 20 to 75mm from the back fence
GZ Axis This is the Gripper Up & Down Axis and works from 27 to 100mm above the bed
Y Axis This is the Axis Away and Toward the operator and works from -120 to 120
Z Axis This is the Up and Down axis and works from -120 to 120
R Axis This is the Ring Angle and works from 0 degrees to 359 degrees, at 90 degrees the tool is closest to the operator.
SY Axis This is the Saw Front/Back axis and affects Cut Lengths on 45 degree pieces, Arrowheads and Y Notches
SZ Axis This is the Saw Up/Down axis and affects Cut Height
SR Axis This is the Saw Blade Rotation Axis


to return to the main page, please click WinMulti Software Operating Guide





Commentaires

Draft

Récupérée de « https://stuga.dokit.app/w/index.php?title=WinMulti_-_Drives&oldid=3650 »
© 2017 - 2024 Dokit, SAS.