Replacing a Windows PC on Site Remotely

Checklist for replacing a PC on site

Process for replacing a PC will depend on the system setup of the PC you are replacing

1. Ensure the network settings are set to "Private"
2. Get the customer to help map the network drive (where the batches are stored). The software will be looking for a drive or folder stored in the "networkdir" parameter
3. Update the Mint software if required
4. Update the Control Systems Log board with the new PC and software version details

For a PC on a flowline / ZX Machining Centre Side these additional steps will be needed

1. Share the SAW directory
2. Remap the saw directory (usually d:\, sometimes e:\) to the new PC by deleting the old mapped directory and remapping it

en none 0

Draft