R0019270 Kit - Autoflow Mk4o1 Infeed Swarf Chute

Fitting the Kit for the infeed swarf tray

R0019270_Kit_-_Autoflow_Mk4o1_Infeed_Swarf_Chute_R0019270.jpg

Problem

Swarf exits the machine under the infeed table.

This is problematic to tidy up because the area is within the infeed table and difficult to access

Solution

A 2 part tray has been designed to fit in this area.

The tray is designed to rest on the base of the goalpost and fix at the top.

The design has been created to make access to drilling new holes as simple as possible - on the top of the clamp plates

en none 0

Draft