Gripper Mechanical Setup - Flowline, Microline, ZX3 or ZX4 : Différence entre versions

[version en cours de rédaction]

Version actuelle datée du 15 novembre 2023 à 19:18

Setting up Flowline, Microline, ZX3 or ZX4 gripper assembly

Setting up Flowline, Microline, ZX3 or ZX4 gripper assembly

Gripper Gripper_Insert_Fitment.png

...This procedure is for the gripper system on Flowline, microline, ZX3 or Zx4 only

For ZX5 gripper, see Gripper Setup -ZX5

For Autoflow gripper, see Gripper Setup - Autoflow

For ZX / Microline / Ecoline see Setting Gripper Nose

...Page currently under construction

en none 0

Draft

@@ Ligne 8 : / Ligne 8 : @@
 <translate>{{Dont|...This procedure is for the gripper system on Flowline, microline, ZX3 or Zx4 only}}
-For ZX5 gripper, see Setting ZX5 Gripper System
+For ZX5 gripper, see [https://stuga.dokit.app/wiki/Gripper_Setup_-_ZX5 Gripper Setup -ZX5]
-For Autoflow gripper, see Setting Autoflow Gripper System
+For Autoflow gripper, see [https://stuga.dokit.app/wiki/Gripper_Setup_-_Autoflow Gripper Setup - Autoflow]
+For ZX / Microline / Ecoline see [[Setting Gripper Nose]]
@@ Ligne 17 : / Ligne 19 : @@
-Page currently under construction</translate>
+{{Info|...Page currently under construction}}</translate>
 {{PageLang
 |Language=en