ZX4 Sensors

This page contains changes which are not marked for translation.

Author avatarAnonymous | Last edit 24/09/2019 by Anonymous being drafted

Showing all major sensors on the ZX4 Machine

Sensors

ZX4 Sensors .png


No. Sensor
1 Off Cut Sensors. There are 8 of these along the Multi Head infeed table.  They are to check the correct length of off cut has been loaded.  
2 Profile Loaded Sensor.  This tells the Machine the profile has been loaded from the infeed table ready to be fed into the Multi Head.
3 Gripper Sensor. This sensor is located on the Gripper assembly and tells the machine the profile has been fed into the Multi Head.
4 Material Loaded Sensors.  There are 2 off these Sensors and they tell the Machine that the profile has been loaded to the Saw In-Feed table.
5 Laser
6 Saw Blade Up/Down.  This sensor tells the machine the vertical position of the saw blade.
7 Saw Blade (Rotation).  This sensor tells the machine the rotational position of the saw blade
8 Profile Eject Sensor.  This sensor tells the machine that the profile is clear of the cutting and can be ejected from the Saw.

Comments

Draft