Troubleshoot - Permanent IP Address - Windows 7 Embedded - Beckhoff

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarAnonymous | Dernière modification 2/10/2019 par Anonymous en cours de rédaction

How to setup or change the IP address on a Beckhoff CX5120/CX5020 running on Windows 7 Embedded.

Étape 1 - No Teamviewer?

Sometimes there is no possible way of connecting to a Beckhoff PC due to an IP address conflict. In this case there are two options:

  1. The customer must find a monitor with DVI port, DVI cable, USB keyboard, USB mouse and complete the next steps.
  2. Connect to the PLC via Remote Desktop from the front end PC using the PLC name (i.e F050B)


Étape 2 - IP Information

When changing a permanent IP address it must be changed to an IP address that has been reserved. The customer is the only person that can assure this. If we cannot gather a permanent IP address put address as high to 250 as possible. Check this IP address is not taken by pinging it.


All other information can be gathered through typing ipconfig/all in the command prompt.



Étape 3 - Navigate and Change

  1. Go to Start
  2. Control Panel
  3. Network Connection
  4. There will be two networks present: one will show EtherCAT; the other EtherNET or Local Area Connection, Right Click on this and go to Properties.
  5. Scroll down the connection options and left click the text of Internet Protocol (TCP/IP) and click Properties
  6. Input IP address, subnet mask and default gateway, preferred and alternate DNS server.
  7. Click OK to submit.

Commentaires

Draft