Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.
Liste de résultats
- Fit the new blade ensuring the teeth are facing the same way it was removed +
- Make sure you have stopped cutting and nothing on the machine is moving - press an emergency stop button to ensure this. +
- Measure the thickness of the brand new or sharpened blade - this should be between 3.8mm - 4.1mm +
- Now carefully remove the blade, with this … Now carefully remove the blade, with this blade being 500mm it will be tight. Ensure you take note of which way the blade spins.
ting direction at the top is towards the rear of the machine</div> </div><br/> + - Now fit the plate, washer and bolt ensuring it's tight +
- Once the bolt is loose; remove the bolt, w … Once the bolt is loose; remove the bolt, washer and plate. ich order they are in, as this is the order they must go back on.</div> </div> +
- Press '[F10] Reset Saw', now close the main door and ensure it will not open and that the 'Guard' message clears +
- Reset the emergency stop circuit by unlatching emergency stop buttons and pressing the physical blue 'ES RESET' button +
- See the tutorial: [[Autocut Open Guard Doors|https://stuga.dokit.app/wiki/Autocut_Open_Guard_Doors]] +
- Through the winSaw software go into '[F5] Settings' and update the 'Kerf' parameter to what the blade thickness is. Press 'Save'. +
- Using the saw blade 'C' spanner and the 24mm spanner, loosen and remove the main bolt going through the centre of the saw blade - anti-clockwise to loosen. +
Français
English
Deutsch
Español
Italiano
Português