R0015352 Mount Buffer Beams

Auteur avatarGareth Green | Dernière modification 2/04/2024 par Gareth Green en cours de rédaction

Introduction

Tools Required


Standard hex key set

Standard spanner set

1 meter spirit level

Tape measure


Parts Required


D0015326 transfer gate upright x 4

D0015334 ZX fence corner post x 2

D0015607 Fence 11 support beam x 4

D0015335 ZX fence cross post x 4

D0010202 Frame joining plate x 2

D0015232 Fence mounting bracket x 2

M0001016 angle bracket x 2

M0000516 adjustable foot x 2



Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connection

Pen mark all fasteners to show finalised



Étape 2 - Assemble corner posts

assemble 2 off corner post assemblies


2 off corner post

4 off upright


Use fix through method with M8 buttons and m8 plate nuts



Étape 3 - Attach fence supports

Attach 4 off fence supports to module C and E frames



Étape 4 - Attach Corner posts

attach pre assembled corner posts to fence supports



Étape 5 - Assemble buffer bars

Assemble 2 off buffer bars


each buffer bar consists of 2 buffer bar sections and 1 joining plate



Étape 6 - Attach buffer bar rear

Attach rear buffer bar.


Fix in position with 2 off angle bracket


include all data for correct position setting


Étape 7 - attach front buffer support brackets

Attach 2 off brackets to blue section on module C and E frames



Étape 8 - attach front buffer bar

Attach front buffer bar


Capture details for correct position , height and setting level



Commentaires

Draft