R0015347 Bench Assemble Duplex extraction unit

Auteur avatarGareth Green | Dernière modification 8/03/2024 par Gareth Green en cours de rédaction

Introduction

Tools Required


Standard Spanner set

Lifting platform

standard screwdriver set


Parts Required


M0000151 Extractor Poly Bags 700G 31.5'' Layflat 50'' Long x 2

M0000274 Extraction Unit Duplex 2off 8' Bags (No Starter) 1850mm x 1

M0000036 ear defence sticker x 1


Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connection

Pen mark all fasteners to show finalised



Étape 2 - Attach mounting plates

Loose fit 4 off mounting plates to legs with supplied fixings in kit


Étape 3 - Lift Extractor body

Use Red lift trolley to raise extractor body to an appropriate height for fitment of legs



Étape 4 - Attach legs

Loose fit 4 off legs to extractor unit when being supported by lifting platform


Use supplied fixings within kit.


Note some fasteners will fit to a rivnut, some will be backed off with nuts. Take note when removing fixings to enable correct refitting when mounting legs to unit


Étape 5 - Set leg positions

Sit assembled extractor on floor and add final tension to all legs and mounting plates to ensure unit sits flat on floor



Étape 6 - Fit extraction cloth bags

Fit 2 off cloth extraction bags using metal bands supplied with kit


Étape 7 - fit waste bags

fit 2 off clear waste bags using ratchet straps supplied with kit


Photos please



Étape 8 - Remove manufacturer logos

Remove all logos from supplier on extraction unit


Photos Please



Étape 9 - Fit ear defence sticker

Fit ear defender sticker to extractor unit


Photos please



Étape 10 - Fix Power connection

1 Position for R-L machine


2 Position for L-R machine


3 Position and drill pre assembled plug ( from electrical, ID as 3F1) M4


4 Connector is positioned 270mm from top of extraction unit and central on leg

Commentaires

Draft