R0015305 Install Wiring loom for Rotary loom

installation of wiring loom and captivating spindle bases

Difficulté

Hard Difficile

Durée

2 hour(s) heure(s)

Install_Wiring_loom_for_Rotary_loom_Screenshot_2023-05-31_100309.png

Introduction

Parts Required

Étape 1 -

All bolts to have Loctite 243 adhesive applied unless otherwise stated

All bolts to be pen marked once adhesive applied and correct tension added

Étape 2 - Quality Check

Check D0000291 spindle base has M4 hole tapped all the way through the plate. Rework if not

Étape 3 - Start Wiring loom installation

Wiring loom is started at position 6 as indicated by picture

1 Green and yellow Ethercat system cables route left to connection box 6

2 300 hz power cable and earth cable route to the right to connection box 7

3 Pre made 300 hz wiring loom .

en none 0 Draft