Instructions for bench assembly of support marms
Difficulté
Facile
Durée
5 heure(s)
Introduction
Tools Required
Standard hex key set
Standard tap sete
Setting jigs
Parts required
B0001170 Spacer 180 off
B0001155 open rail 18 off
D0015552 Transfer Support arm R/H (right to left machine ) OR D0015553 Transfer Support Arm L/H ( Left to Right machine)
D0015554 x 18Étape 1 - Unless otherwise stated
Use Loctite 243 on all fasteners
Use Loctite 572 on all threaded pneumatic connections
Pen mark all bolts to show finalised
Étape 2 - Clean all threads
Use Drill on speed one torque 15 and tap to remove debris build up from coating process in all tapped holes in each support arm
Étape 3 - Align spacers and fit setting jigs
1 Mount 4 off setting jigs to arm on the indicated points
2 align spacers over all m5 holes
Étape 4 - Fix Rail to arm
1 Use M5 x 25 socket cap and A form washer with loctite 243 to fix rail to arm
2 Ensure rail touching setting jig as indicated and two rails are pushed completely together
Étape 5 - Fit support arm spacers to arms
2 off per arm
Details of fastener and position required please
Draft
Français
English
Deutsch
Español
Italiano
Português