R0015250 Bench Assemble Support Arms

Instructions for bench assembly of support marms

Difficulté

Easy Facile

Durée

5 hour(s) heure(s)

R0015094_Bench_Assemble_Support_Arms_Screenshot_2023-05-16_160815.png

Introduction

Tools Required

Standard hex key set

Standard tap sete

Setting jigs

Parts required

B0001170 Spacer 180 off

B0001155 open rail 18 off

D0015552 Transfer Support arm R/H (right to left machine ) OR D0015553 Transfer Support Arm L/H ( Left to Right machine)

D0015554 x 18

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all bolts to show finalised

Étape 2 - Clean all threads

Use tap to remove debris build up from coating process in all tapped holes in each support arm

Étape 3 - Align spacers and fit setting jigs

1 Mount 4 off setting jigs to arm on the indicated points

2 align spacers over all m5 holes

Étape 4 - Fix Rail to arm

1 Use M5 x 25 socket cap and A form washer with loctite 243 to fix rail to arm

2 Ensure rail touching setting jig as indicated and two rails are pushed completely together

Étape 5 - Fit support arm spacers to arms

2 off per arm

Details of fastener and position required please

en none 0 Draft