R0015284 Frame ancillaries

Instructions to mount items such as wire basket to main frame

Difficulté

Easy Facile

Durée

2 hour(s) heure(s)

R0015284_Frame_ancillaries_Screenshot_2023-07-14_125358.png

Introduction

Tools Required

115mm disc cutter

Standard Hex key set

Standard spanner set

Standard tape measure

Standard Tap set

Standard HSS drill set

Parts Required

A0001060 Support bracket :Cable basket Tray x 5

A0001061 Retainer: Wire Basket Cable Tray x 7

A0001065 Wire cable tray 3m length x 3

D0015611 Reference Levelling Bracket x 2

Étape 1 - Mount upper basket

Cut 1 piece of A0001065 Wire cable tray to the length shown ( 7 sections)

And drill to fit to indicted position on rear of blue support bar

Fix with 2 off A0001061 basket retainers as shown

Étape 2 - Mount lower support brackets

Fit 5 off basket support bracket to pre drilled holes at indicated points .

Secure using M8 x 20 socket caps and Large M8 washers

Étape 3 - Fit lower wire basket

Mount 2 full lengths of A0001065 wire basket to previous fitted brackets .

1 Join should be at central bracket between two sections and both baskets encapsulated with a retainer

2 Fix wire baskets to support brackets using 5 off A0001061

Use M6 x 20 button sockets, M6 penny washers and m6 nyloc nuts

Étape 4 - Fit Levelling brackets

2 off Leveling pads D0015611 fitted to indicated positions

Étape 5 - Position and drill

Position pad as shown and drill 1 off M6 tapped hole and secure with M6 x 20 socket cap and heavy washer. Use engineers level to level bracket, then mark and drill second M6 tapped hole.

Finalise fasteners, whilst using level to ensure bracket remains level on the indicated plain.

Repeat for 2nd pad position

en none 0 Draft