R0015282 Fit Transfer Sliders and Set wheels

Instructions on mounting an setting slider unit wheels correctly

Difficulté

Medium Moyen

Durée

1 hour(s) heure(s)

R0015282_Fit_Transfer_Sliders_and_Set_wheels_Screenshot_2023-07-14_091025.png

Introduction

Tools Required

Standard spanner set

Parts Required

Pre built Slide units R0015281

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all bolts to show finalised

Étape 2 - Fit slider units to Arms

1 Ensure drive pinion is slid away from assembly

2 Use setting dokit Setting Delrin Transfer Table Wheel Tension

and set delrin wheels to correct tension. Check at all points over oozenest V rail

3 Repeat for all 9 units

en none 0 Draft