R0015277 Set Drive pinions in position

Instructions to correctly set drive pinions into positions on shafts

Difficulté

Medium Moyen

Durée

1 hour(s) heure(s)

R0015277_Set_Drive_pinions_in_position_Screenshot_2023-07-14_080247.png

Introduction

Tools Required

Standard Hex key set

Parts Required

none

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all fasteners to show finalised

Étape 2 - Set shaft position

• The pair of shafts that are joined together can be moved in the directions show to give the optimal contact on keys and drive pinions
• Take all 9 arm positions into consideration and position each shaft accordingly to achieve the best overall position to suit all arms
• Pinion lock points should always be above keyways

Étape 3 - Lock shaft position

Individually remove and apply Loctite 243 to all grubscrews on spherical bearings.

2 off grubscrew per bearing

9 off bearing

18 off grubscrew in total

Étape 4 - Set pinion position

9 off pinions can now be set in position and finalised

Set position of pinion to achieve as much contact as possible with drive rail, without contacting side of support arm

Étape 5 - Lock Pinion

lock each pinion in position as follows.

M6 x 10 kcp Grubscrew in hole that contacts key on shaft

M6 x 10 flat bottomed grubscrew on fixing hole that contacts directly onto shaft

en none 0 Draft