R0015265 Mount Infeed arm covers and End guards

Instructions to fit safety covers to arms

Difficulté

Medium Moyen

Durée

2 hour(s) heure(s)

R0015265_Mount_Infeed_arm_covers_and_End_guards_Screenshot_2023-07-05_100139.png

Introduction

Tools required

Standard hex key set

Parts Required

A0000307 Domed Blanking Plug 32mm

D0015457 Infeed Arm End Cover

D0015518B Infeed Arm Guard

Étape 1 - Unless otherwise stated

Use loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all bolts to show finalised

Étape 2 - Fit Arm Guards

1 Fit 9 off D0015518B Infeed Arm Guard

Use M4 x 12 socket caps and M4 A form washers to secure

2 When fitting last arm cover, rear end fence will require removing to fit cover.

Once guard is fitted , add adhesive to end fence fixings and finalise bolts

Étape 3 - Fit End covers

Fit 9 off D0015457 Infeed Arm End Cover

Use M6 x 12 socket caps and M6 A form washers

Étape 4 - Fit Bungs

Fit 24 off A0000307 Domed Blanking Plug 32mm as shown into arm guards.

en none 0 Draft