Key Steps for mechanical installation of ZX5
Difficulté
Moyen
Durée
16 heure(s)
Introduction
Key data for installation of ZX5
Étape 1 - Module Positioning
Identify if either saw infeed or multi head outfeed is the logical frame to place first .
Consider access to machine when installing 1st frame
Consider handing of machine
Étape 2 - Levelling of multi outfeed or saw infeed Y axis
Both frames will be initially levelled in the same way, and then fine tuned once multi head or saw is installed
Y axis levelling
- Only level the arms at the positions indicated, as these are the only arms that sit directly above adjustment feet
- Level support arms from the indicated face
Étape 3 - Levelling of multi outfeed or saw infeed X axis
X axis is initially set up using the hepco rail as a register. Once additional units are installed and levelled , this x axis setting will be re checked and adjusted if required
Draft
Français
English
Deutsch
Español
Italiano
Português