Stuertz Welder - Setting Barcode Reader

Setting up a VSM barcode reader

Difficulté

Medium Moyen

Durée

10 minute(s) minute(s)

VSM, Barcode VSM_Welder_After_Welding_Options_VSM-P-hero.jpg

Introduction

How to set up a VSM welder and barcode reader

Étape 1 - Log in HMI as Software

Étape 2 - Install Software to emulate COM port

If this is a Zebra scanner, the Zebra CDC scanner program will be installed already.

For other manufacturers, this may need to be downloaded from the internet

Étape 3 - Open the Device Manager to see the COM Ports

Étape 4 - Enable option to emulate COM port

For a Zebra barcode reader -

Use Reader manual to scan the barcode

or scan the barcode opposite

or see the barcode at this address

Étape 5 - Select COM port on HMI on the Barcode setting page

Here you can also select length of string and test the barcode reader function

Étape 6 - Setup the directory for the barcode files

There is a "load file" button on the welding page which allows you to change the file path

en none 0 Draft