List of output references used on Stuga Machines
Sommaire
For input references see here
- All Stuga machines share similar outputs to do similar functions (eg the gripper on output is the same on any machine). To keep this modular approach, each function is given a specific reference number from 1 to 500. This reference or IORef is the same on any machine.
- This number is used as the wire labelling number on newer machines (all Autoflows and ZX5s)
- To maintain backwards compatibility with older machines (Saws, Flowlines, Ecolines, etc, there is also a cross-reference to the original cable numbering.
- More information on a particular input can be found by clicking on the code, if external ink is set (blue text)
| IORef | Legacy Wire Label | Code | Description |
|---|---|---|---|
| 1 | Y25
OY2 |
Ou_GRIP
GRIP |
Gripper on flowlines |
| Y001 | OuA_Grip | Gripper on Autoflow | |
| 3 | OuA_GripBlow | ||
| 4 | OuA_LoadBlow | ||
| 5 | OuA_PopUp | ||
| 6 | OuA_Dog0 | ||
| 7 | OuA_Dog1 | ||
| 8 | OuA_Dog2 | ||
| 9 | OuA_Dog3 | ||
| 10 | OuA_Dog4 | ||
| 11 | OuA_Dog5 | ||
| 12 | OuA_PopV9 | ||
| 13 | OuA_PopUpPush | ||
| OuA_PopH1 | |||
| 14 | OuA_PopUp2 | ||
| 15 | OuA_PopUp3 | ||
| 16 | OuA_PopUp4 | ||
| 17 | OuA_PopUp5 | ||
| 18 | OuA_PopUp6 | ||
| 19 | OuA_PopUp7 | ||
| 20 | OuA_PopUp8 | ||
| 21 | OuA_GripTurn | Sturtz Infeed Grip Turn Cylinder Up | |
| 22 | OuA_StopX | ||
| 23 | OuA_InfeedAdv | ||
| 24 | OuA_BrakesOff | ||
| 25 | OuA_CillSupport | ||
| 26 | OuA_EDSpindleOn | ||
| 27 | OuA_EDClamp | ||
| 28 | OuA_EDPlunge | ||
| 29 | OuA_EDGuardOpen | ||
| 30 | OuB_ClampIT | ||
| 31 | OuB_ClampITPos | ||
| 32 | OuB_ClampIS | ||
| 33 | OuB_ClampISPos | ||
| 34 | OuB_ClampOT | ||
| 35 | OuB_ClampOTPos | ||
| 36 | OuB_ClampOS | ||
| 37 | OuB_ClampOSPos | ||
| 38 | OuB_Spin1Pl | ||
| 39 | OuB_Spin2Pl | ||
| 40 | OuB_Spin3Pl | ||
| 41 | OuB_Spin4Pl | ||
| 42 | OuB_Spin5Pl | ||
| 43 | OuB_Spin6Pl | ||
| 44 | OuB_Spin7Pl | ||
| 45 | OuB_Spin8Pl | ||
| 46 | OuB_Spin1On | ||
| 47 | OuB_Spin2On | ||
| 48 | OuB_Spin3On | ||
| 49 | OuB_Spin4On | ||
| 50 | OuB_Spin5On | ||
| 51 | OuB_Spin6On | ||
| 52 | OuB_Spin7On | ||
| 53 | OuB_Spin8On | ||
| 54 | OuB_Spin1DP | ||
| 55 | OuB_Spin2DP | ||
| 56 | OuB_Spin3DP | ||
| 57 | OuB_Spin4DP | ||
| 58 | OuB_Spin5DP | ||
| 59 | OuB_Spin6DP | ||
| 60 | OuB_Spin7DP | ||
| 61 | OuB_Spin8DP | ||
| 62 | OuB_SpinFwd | ||
| 63 | OuB_Spin300 | ||
| 64 | OuB_Oiler | ||
| 80 | OuF_ClampIT | ||
| 81 | OuF_ClampITPos | ||
| 82 | OuF_ClampOT | ||
| 83 | OuF_ClampOTPos | ||
| 84 | OuF_ClampIS | ||
| 85 | OuF_ClampOS | ||
| 86 | OuF_ClampITRoll | ||
| 87 | OuF_EjectPush | ||
| 90 | OuF_Conveyor | ||
| 91 | OuF_Eject | ||
| 92 | OuF_TiltSaw | ||
| 93 | OuF_OffcutBlow | ||
| 94 | OuF_Siren | ||
| 95 | OuF_Gate | ||
| 96 | OuF_TiltPos | ||
| 97 | OuF_SawOn | ||
| 98 | OuF_ExtractOn | ||
| 99 | OuF_ChuteBlow | ||
| 100 | OuA_Dog6 | ||
| 101 | OuA_Dog7 | ||
| 102 | OuA_Dog8 | ||
| 103 | OuF_SRBlw | Blower for SR Axis | |
| 104 | |||
| 105 | |||
| 106 | |||
| 107 | OuA_Crank | Module A Crank | |
| 108 | OuA_DDrlMot | Datum Drill Motor | |
| 109 | OuA_ConvFwd | ||
| 110 | OuA_ConvRev | ||
| 111 | OuA_WheFwd | ||
| 112 | OuA_WheRev | ||
| 121 | OuC_GripH | Module C Grip Height Home | |
| 122 | OuC_BlwRack | Module C Rack Blower | |
| 123 | OuC_BlwGrip | Module C Grip Blower | |
| 124 | OuC_Roller | Module C Roller Lift | |
| 125 | OuC_Chan1 | Module C Channel | |
| 126 | OuC_BeamPosH | GX Axis Beam Position Home | |
| 127 | OuC_BeamPosO | GX Axis Beam Position Out | |
| 128 | OuC_CrankFwd | Module C Crank | |
| 131 | OuE_GripH | Module E Grip Height | |
| 132 | OuE_Grip | Module E Grip | |
| 133 | OuE_BlwRail | Module E Blower for Loader linear rails | |
| 145 | OuE_BlwGrip | Module E Grip Blower | |
| 146 | OuE_Roller | Module E Roller Lift | |
| 150 | OuE_Backfence | Module E Backfence Roller Lift - Not used | |
| 151 | OuE_Crank | Module E Crank | |
| 152 | OuA_Chan1 | Module A Channel 1 | |
| 153 | OuA_Chan2 | Module A Channel 2 (Datum Drill) | |
| 154 | OuA_WheelH | Module A Wheel Height | |
| 155 | OuA_ChanLock | Module A Channel Lock | |
| 156 | OuA_DDrillPl | Datum Drill Plunge | |
| 157 | OuA_Roller | Module A Roller | |
| 158 | OuA_DDClamp | Datum Drill Clamp On | |
| 159 | OuC_GripLock | Gripper position lock Module C | |
| 160 | OuE_GripLock | Gripper position lock Module E | |
| 200 | OuF_GuardOpen | ||
| 201 | OuB_GuardOpen | ||
| 202 | OuF_ClampS | ||
| 203 | OuA_LoadClear | ||
| 204 | OuF_ClampPos | ||
| 206 | OuF_ClampCen | ||
| 207 | OuF_SawCut | ||
| 208 | OuF_Saw90 | ||
| 209 | OuF_Saw135 | ||
| 210 | OuF_ZsupportI | Z Support Cylinder (on ZX5 this is the infeed side) | |
| 211 | OuF_ClampSPos | ||
| 212 | OuF_ClampITHi | ||
| 213 | OuF_SawBlow | ||
| 214 | OuF_ZITurret | Z Turret Turn Infeed | |
| 215 | OuF_ZOTurret | Z Turret Turn Outfeed | |
| 216 | OuB_Red | MH Red Lamp | |
| 217 | OuB_Amber | MH Amber Lamp | |
| 218 | OuB_Green | MH Green Lamp | |
| 219 | OuF_RedSaw | Saw Red Lamp | |
| 220 | OuE_ChannelLock | ||
| 221 | OuE_ChannelPush | ||
| 222 | OuE_FlipZ | ||
| 223 | OuF_GreenSaw | Saw Green Lamp | |
| 224 | OuF_ZsupportO | Z Support Cylinder Outfeed Side on ZX5 only | |
| 227 | OuE_SRSTSaw | Added by BB for Flowline with RS Auto/Beckhoff control | |
| 228 | OuE_TrMotor | ||
| 229 | OuE_TrDog1 | ||
| 230 | OuE_TrDog2 | ||
| 231 | OuE_TrDog3 | ||
| 232 | OuE_TrDog4 | ||
| 233 | OuE_TrDog5 | ||
| 234 | OuE_TrDog6 | ||
| 235 | OuE_TranUpDown | ||
| 236 | OuE_TranAcross | ||
| 237 | OuF_OffsetAH | ||
| 238 | OuE_BlwLens | ||
| 239 | OuE_BlwMLoad | Material load blower on Module E on ZX5 | |
| 240 | OuE_BlwHole | ||
| 241 | OuE_BlwRack | ||
| 242 | OuE_PushLift | ||
| 243 | OuB_BlwUR | ||
| 244 | OuC_BlwMLoad | Material Load Blower | |
| 250 | OuA_NextBar | ||
| 251 | OuA_VorBack | Sturtz Infeed Forward Carriage Back (Vorlaufwagen) | |
| 252 | OuA_VorFwd | Sturtz Infeed Forward Carriage Fwd | |
| 253 | OuA_VorUp | Sturtz Infeed Forward Carriage Clamp Up | |
| 254 | OuA_VorDn | Sturtz Infeed Forward Carriage Clamp Down | |
| 255 | OuA_GSGrip | Sturtz Infeed Grip Profile Short Grip (Shorter of the two cylinders) | |
| 256 | OuA_GSOff | Sturtz Infeed Grip Profile Short Open | |
| 257 | OuA_GSOff | Sturtz Infeed Grip Profile Long Open (longer of the two cylinders)
Output Ref 001 is used for the longer one as this is equivalent to grip output) | |
| 258 | OuA_TurnUp | Sturtz Infeed Grip Turn Cylinder Up
Output ref 021 equivalent to Grip Turn | |
| 259 | OuA_LiftUp | Sturtz Infeed Roller Table Up | |
| 260 | OuA_LiftUDn | Sturtz Infeed Roller Table Down | |
| 261 | OuA_StopDn | Sturtz Infeed Paddle Stop Up | |
| 262 | OuA_StopDn | Sturtz Infeed Paddle Stop Down | |
| 263 | OuA_GRTRotate | Sturtz Infeed Guide Roller Turn Cylinder Rotate | |
| 264 | OuA_GRTOpen | Sturtz Infeed Guide Roller Turn Cylinder Initial | |
| 265 | OuA_GRHClamped | Sturtz Infeed Guide Roller Height Cylinder Clamp | |
| 266 | OuA_GRHOpen | Sturtz Infeed Guide Roller Height Cylinder Open | |
| 267 | OuA_InfeedLift | Profile lift clear of infeed belts | |
| 268 | OuA_SillLift | On Ancil saw, popup cylider to support profile | |
| 269 | OuB_BlwRing | ||
| 270 | OuB_CLIHold | ||
| 271 | OuB_InvDP | ||
| 272 | OuC_BlwRail | ||
| 273 | OuC_CrankFwd | Module C Crank Motor Fwd - on reversing motor. Z067+ | |
| 274 | OuC_CrankRev | Module C Crank Motor Rev - on reversing motor Z067+ | |
| 275 | OuD_CrankFwd | Module D Crank Motor Fwd - on reversing motor Z067+ | |
| 276 | OuD_CrankRev | Module D Crank Motor Rev - on reversing motor Z067+ | |
| 277 | OuE_CrankFwd | Module E Crank Motor Fwd - on reversing motor Z067+ | |
| 278 | OuE_CrankRev | Module E Crank Motor Rev - on reversing motor Z067+ | |
| 279 | OuA_OpSiren | Operator Siren | |
| 290 | Y290 | OuF_CLHClose | Sturtz Outfeed Horizontal Clamp Close |
| 291 | Y291 | OuF_CLHOpen | Sturtz Outfeed Horizontal Clamp Open |
| 292 | Y292 | OuF_LiftUp | Sturtz Outfeed Lift Station Up |
| 293 | Y293 | OuF_LiftDn | Sturtz Outfeed Lift Station Down |
| 294 | Y294 | OuF_OBarBlw | Sturtz Outfeed Bar Blower |
| 295 | Y295 | OuF_ConvFwd | Sturtz Outfeed Conveyor Forward |
| 296 | Y296 | OuF_ConvRev | Sturtz Outfeed Conveyor Reverse |
| 319 | Ou_IPullOff | Ecoline Infeed Pull Off | |
| 320 | Ou_CLVHi | Ecoline V notch top clamp High pressure | |
| 321 | Ou_EJPSH2 | Ecoline / Microline outfeed push 2 | |
| 322 | Ou_VBLOW | Ecoline V Notch Blower | |
| 323 | Ou_IPULLO | Ecoline Infeed Pull Valve off (3 position valve) | |
| 324 | Ou_LENBLOW | Length sensor blower (not Used) | |
| 325 | Ou_VTURN | Ecoline V Front Turn | |
| 326 | Ou_WTURN | Ecoline V Rear Turn | |
| 327 | Ou_CLVO | Ecoline V Notch outfeed Side Clamp | |
| 328 | Ou_CLVI | Ecoline V Notch Infeed Side Clamp | |
| 329 | Ou_BcGrn | Ecoline Barcode Reader Green LED | |
| 330 | Ou_BcRed | Ecoline Barcode Reader Red LED | |
| 331 | Ou_BlwInfeed | Ecoline & Sturtz Infeed Blower | |
| 332 | |||
| 333 | OuA_PopUp1Off | Sturtz Infeed Push To Backfence 1 Open | |
| 334 | OuA_PopUp2Off | Sturtz Infeed Push To Backfence 2 Open | |
| 335 | OuA_PopUp3Off | Sturtz Infeed Push To Backfence 3 Open | |
| 336 | OuA_PopUp4Off | Sturtz Infeed Push To Backfence 4 Open | |
| 337 | OuA_PopUp5Off | Sturtz Infeed Push To Backfence 5 Open | |
| 338 | OuA_PopUp6Off | Sturtz Infeed Push To Backfence 6 Open | |
| 339 | OuA_PopUp7Off | Sturtz Infeed Push To Backfence 7 Open | |
| 340 | |||
| 341 | |||
| 342 | |||
| 343 | |||
| 344 | |||
| 345 | |||
| 350 | Y1 | Ou_CLIT | |
| 351 | Y2 | Ou_CLIS | |
| 352 | Y3 | Ou_CLO | |
| 353 | Y4 | Ou_INDEX | Conveyor Motor |
| 354 | Y5 | Ou_CLUTC | |
| 355 | Y6 | Ou_STRAI | |
| 356 | Y7 | Ou_CLCL | ClampClamp hold - used on
Ecoline Flowline with DOS control |
| 357 | Y8 | Ou_ALIGN | |
| 358 | Y9
Y31 |
Ou_SMOT | |
| 359 | Y10 | Ou_MLOAD | Load Wheel / Roller Motor |
| 360 | Y11 | Ou_WBLOW | |
| 362 | RY1 | SPIN1 | |
| 363 | RY2 | SPIN2 | |
| 364 | RY3 | SPIN3 | |
| 365 | RY4 | SPIN4 | |
| 366 | RY5 | SPIN5 | |
| 367 | RY6 | SPIN6 | |
| 368 | SPIN7 | ||
| 369 | SPIN8 | ||
| 370 | OY1 | Ou_EJPSH | |
| 372 | OY3 | Ou_GRPSH | |
| 373 | OY4
Y27 Y373 |
Ou_OBLOW |
Sturtz Outfeed Sensor Blower |
| 374 | Ou_SRSTM/H | BB added M/H to description because we need to keep M/H and Saw side separate | |
| 375 | Y54 | Ou_OMBLW | Material Load Blower on Module A on Zx5 |
| 376 | SPDP3 | ||
| 377 | SPDP5 | ||
| 378 | Ou_ServoEnMH | Added by BB | |
| 379 | Ou_ServoEnSaw | Added by BB | |
| 380 | Ou_IREV | Infeed Conveyor Motor Reverse | |
| 381 | Ou_IMOT | Infeed Conveyor Motor On | |
| 383 | Ou_CLOUO | Under roller on outfeed side of V notch assembly | |
| 384 | Y52 | Ou_IPULL | |
| 385 | Y53 | Ou_IGRIP | OuA_IGrip on ZX5 |
| 386 | OuB_CLOI | ||
| 387 | Ou_VMOT | ||
| 388 | Ou_WMOT | ||
| 389 | Y32 | Ou_VICUT | |
| 390 | Y33 | Ou_VOCUT | |
| 391 | Y36 | Ou_WICUT | |
| 392 | Y37 | Ou_WOCUT | |
| 393 | Y42 | Ou_CLOO | Roller clamps on far outfeed side of Machining centre |
| 394 | Y43 | Ou_CLOUI | Under roller on infeed side of V notch assembly |
| 395 | Y44 | Ou_CLV | Fixed V notch clamp (front). Used for top and side V clamps on ZX5 |
| 396 | Ou_CLW | Fixed V notch clamp (Rear) | |
| 397 | Y16 | SPPL1 | |
| Ou_VOURO | Microline | ||
| 398 | Y17 | SPPL2 | |
| Ou_BLOWC | Microline | ||
| 399 | Y18 | SPPL3 | |
| Ou_BLOWD | Microline | ||
| 400 | Y19 | SPPL4 | |
| Ou_OPEN | Microline | ||
| 401 | Y20 | SPPL5 | |
| Ou_WASTE | Microline | ||
| 402 | Y21 | SPPL6 | |
| Ou_SWMOT | Microline | ||
| 403 | Y22 | SPPL7 | |
| Ou_SAWC | Microline | ||
| 404 | Y23 | SPPL8 | |
| Ou_S90 | Microline | ||
| 405 | Ou_S135 | Microline | |
| 406 | Ou_CLSIV | Microline | |
| 407 | Ou_CLSIP | Microline | |
| Microline see 418 | |||
| 409 | Ou_CLSOP | Microline | |
| 410 | Ou_CLSIH | Microline | |
| 411 | Ou_CLSOH | Microline | |
| 412 | Ou_EJPS2 | Microline | |
| 413 | Ou_RRBLW | Ring Rack Blower | |
| 414 | Ou_RREXT | Ring Rack Extractor | |
| 415 | Ou_IDLE | v3.67 Idle Beacon | |
| 416 | Ou_InvDP | Inverter Double Plunge Current Boost
also 271 | |
| 418 | Ou_CLSOV | Microline - M005 moved to this number because it did not work on 408 (608) | |
| 419 | Y419 | Ou_GripPulse | Pulse Output for grip height Somatec unit |
| 425 | Reserved | SPBL1 | Spindle blow outputs reserved due to SPPLn+28 in Spindle On code. See Monday item |
| 426 | Reserved | SPBL2 | |
| 427 | Reserved | SPBL3 | |
| 428 | Reserved | SPBL4 | |
| 429 | Reserved | SPBL5 | |
| 430 | Reserved | SPBL6 | |
| 431 | Reserved | SPBL7 | |
| 432 | Reserved | SPBL8 | |
| 440 | |||
Draft
Français
English
Deutsch
Español
Italiano
Português