WinDelay for Twincat Startup

Auteur avatarGareth Green | Dernière modification 18/07/2022 par Gareth Green en cours de rédaction

Introduction

When Windows Boots up and WinMulti is started the TwinCat PLC is not in Run mode ready for the application. The Run mode of Twin cat normally takes between 70 to 90 seconds.

WinStartDelay is a piece of software which delays Winmulti Starting up until the Amount of Time Delay needed has been run.


Étape 1 - Down load the software.

This can be downloaded from Dropbox (Stuga Machinery Ltd)\Service\WinStartDelay\winstartdelay.zip



Étape 2 - Unzip all the contents to the C:\ (root).

Once done you will have folder called WinStartDelay in the Root of C:\




Étape 3 - Copy the Winmulti.bat file to C:\multi Folder

This file will call up the Winmulti.exe to run file after the Delay has been applied.



Étape 4 - Checking the Startup Delay

Please open settings.txt file in C:\WinDealystartup.


The 1st line contains the Delay in Seconds.

The 2nd Delay is the Path of where the WinMulti.bat file is.



Étape 5 - Adding the File to the Startup for windows.

Étape 6 - Checking the Startup Delay

Please open settings.txt file in C:\WinDealystartup.


The 1st line contains the Delay in Seconds.

The 2nd Delay is the Path of where the WinMulti.bat file is.



Étape 7 - Adding the File to the Startup for windows.

Please unsure that File name Extensions and Hidden items are allowed by having a Tick in the box.


Commentaires

Draft