TB165 C0001 Stepper Motor Obsolescence

The C0001 stepper motor used on the G axis of flowlines and on all motors on the router has become obsolete. A replacement will be available using the same Stuga part number

TB165_C0001_Stepper_Motor_Obsolescence_C0000001.JPG

Technical Bulletin

TB Number:	165
Originator:	Gareth Green
Machine:	Router, Mk3, ZX, Microline
Date:	15/06/10
Circulate to:	Service
Title:	C0001 Stepper Motor Obselescence
Revision 1	Error in L series colours 2nd Black should be Yellow/White
Revision 2	Added 5 pin plug pin nos to table
Revision 3	Pins 3 and 4 in table wrong way round
Revision 4	Wiring for Mclennan 34HSX Motor

The C0001 stepper motor used on the G axis of flowlines and on all motors on the router has become obsolete.

A replacement will be available using the same Stuga part number

Old Manufacturer’s number:       SMS343-098-S-FN       

New Manufacturer’s Number:     SMR343-090-L-FN

The new version is mechanically the same.  It’s a rare earth magnet construction (S series was standard magnets) which will provide about 30-40% more torque. The current setting on the drives should be the same too – so no need to adjust drive current in new or existing installations.

The wiring is the only change we need to be aware of – they have the same colours, but (confusingly) they are used for different purposes!

S Series Original	Green	Orange	Black/ White	Green/ White	Red/ White	White	Black	Red
L Series Replacement	Black	Black/ White	Orange/ White	Orange	Red	Red/ White	Yellow / White	Yellow
Mclennan 34HSX	Black	Black/ White	Orange/ White	Orange	Red	Red/ White	Yellow / White	Yellow
Pin Number (5pin plug on ZX / Microline	1	3	1	3	4	2	4	2

Datasheet for Mclennan motor

en none 0

Draft