Common Issue - V Notching Too Close To End Of Bar

Problems generated if V notch is to close to end of bar

Bar End, V Notch, Ring, Gripper

Start Of Bar (Gripper End)

If a V notch is too close to the end, it can have detrimental effects

Machine	Limit	Effect
ZX3 / Microline / Flowline Mk3	<300mm	Gripper can hit ring when carrying out the reverse move on V notch cutting
ZX5	<250mm	The xholdpos will stop the V notch coming on if the x axis position is too low

End of Bar

en none 0

Draft