PC network configuration of the ZX3 or ZX4 following a "full windows upgrade". This replaces both the MH side PC, as in Flowline B plus the saw side PC.
Sommaire
Summary
Setup follows the format of FlowlineB with two independent machines with independent control systems. In FlowlineC, the saw side ACEPC is replaced with a similar PC to the MH side. Depending on the year of the upgrade, these could be Windows XP, 7, 8.1 or 10 machines. The Saw side PCgenerally maps a drive and runs its control software from a shared directory on the MH side computer.
Both PCs have a network port and are connected through a 5 port switch located in the MH cabinet
| MH Side | Saw Side |
|---|---|
| F0nn
where nn is the build number |
F0nnS
where nn is the build number |
| MH Setup Files | Saw Setup Files | MH Front End Software | Saw Front End Software |
|---|---|---|---|
*.mul initialisation filesc:\
|
*.saw initialisation filesd:\ |
written in vb.net c:\multi\winmulti.exe |
written in vb.net d:\winStugaSawVB.exe |
Location of folder structure of MH side and saw side can be changed in the local masterdir.saw. See https://stuga.dokit.app/wiki/Masterdir_File
PCs
Historically, these PCs could be one of a number of different hardwares
- ACER Revo (Windows XP, 7, 8.1)
- Gapton or Netmatters supplied "CNC" machine
Draft
Français
English
Deutsch
Español
Italiano
Português