Showing all major sensors on the ZX4 Machine
Sommaire
Sensors
| No. | Sensor |
|---|---|
| 1 | Off Cut Sensors. There are 8 of these along the Multi Head infeed table. They are to check the correct length of off cut has been loaded. |
| 2 | Profile Loaded Sensor. This tells the Machine the profile has been loaded from the infeed table ready to be fed into the Multi Head. |
| 3 | Gripper Sensor. This sensor is located on the Gripper assembly and tells the machine the profile has been fed into the Multi Head. |
| 4 | Material Loaded Sensors. There are 2 off these Sensors and they tell the Machine that the profile has been loaded to the Saw In-Feed table. |
| 5 | Laser |
| 6 | Saw Blade Up/Down. This sensor tells the machine the vertical position of the saw blade. |
| 7 | Saw Blade (Rotation). This sensor tells the machine the rotational position of the saw blade |
| 8 | Profile Eject Sensor. This sensor tells the machine that the profile is clear of the cutting and can be ejected from the Saw. |
Draft
Français
English
Deutsch
Español
Italiano
Português