Fitting instructions for Teknomotor Spindle when replacing Elte Motor
ZX and Autoflow Fitting
| Machine Type | Bracket Code | Photo |
|---|---|---|
| Autoflow | ||
| ZX5 | D0010762B |  |
Ecoline Fitting
Serial Plate must be removed
M6 socket cap positions shown are not required and should not be refitted
Wiring
 |
| Wiring differences - Wire as Star configuration |
Rear Cover
Elte motors were supplied with a replacement plastic rear cover without fan baffle. The reason for this cover was a suggestion that when clogged with swarf, it may contribute to premature failure of the motor due to overheating. Since this assumption, many other (proven) root causes have been found, so the decision has been made on the Teknomotor to retain the cover plate as fitted and monitor the situation.
Collet Nut
The collet nut supplied as standard with a Teknomotor is a C-type. Please discard this and use the collet and nut from the replaced motor
Draft
Français
English
Deutsch
Español
Italiano
Português