Autoflow Power On

How to power on the ZX5

Difficulté

Very easy Très facile

Durée

1 minute(s) minute(s)

ZX5, power ZX5_Power_On_button-1428090_1280.png

Étape 1 - Ensure the air and electrical supplies are on

(minimum 6 bar to machine)

Étape 2 - Isolators on

Ensure the isolator at the rear of the machining module and the isolator on the door of the saw console are switched on

Étape 3 - Guard Doors Closed

Ensure all guard doors are closed on the Multihead and Saw

Étape 4 - Emergency Stop Buttons pulled out

Étape 5 - Load "winMulti"

Étape 6 - Press Start to Initialise

en none 0 Draft