R0015347 Bench Assemble Duplex extraction unit

Assembly details for duplex extractor unit

Difficulté

Medium Moyen

Durée

2 hour(s) heure(s)

R0015347_Bench_Assemble_Duplex_extraction_unit_Screenshot_2023-10-31_090919.png

Introduction

Tools Required

Standard Spanner set

Lifting platform

standard screwdriver set

Parts Required

M0000151 Extractor Poly Bags 700G 31.5'' Layflat 50'' Long x 2

M0000274 Extraction Unit Duplex 2off 8' Bags (No Starter) 1850mm x 1

M0000036 ear defence sticker x 1

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connection

Pen mark all fasteners to show finalised

Étape 2 - Attach mounting plates

Loose fit 4 off mounting plates to legs with supplied fixings in kit

Étape 3 - Lift Extractor body

Use Red lift trolley to raise extractor body to an appropriate height for fitment of legs

Étape 4 - Attach legs

Loose fit 4 off legs to extractor unit when being supported by lifting platform

Use supplied fixings within kit.

Note some fasteners will fit to a rivnut, some will be backed off with nuts. Take note when removing fixings to enable correct refitting when mounting legs to unit

Étape 5 - Set leg positions

Sit assembled extractor on floor and add final tension to all legs and mounting plates to ensure unit sits flat on floor

Étape 6 - Fit extraction cloth bags

Fit 2 off cloth extraction bags using metal bands supplied with kit

Photos please

Étape 7 - fit waste bags

fit 2 off clear waste bags using ratchet straps supplied with kit

Photos please

Étape 8 - Remove manufacturer logos

Remove all logos from supplier on extraction unit

Photos Please

Étape 9 - Fit ear defence sticker

Fit ear defender sticker to extractor unit

Photos please

Étape 10 - Fix Power connection

1 Position for R-L machine

2 Position for L-R machine

3 Position and drill pre assembled plug ( from electrical, ID as 3F1) M4

4 Connector is positioned 270mm from top of extraction unit and central on leg

en none 0 Draft