12
Difficulté
Facile
Durée
10 minute(s)
Étape 1 - Plug in
- Ethernet cable to the network
- VGA cable to a monitor
- PS/2 cable to a keyboard
Étape 2 - Insert Flash Disk
Make sure the flash disk is the correct way around when inserting.
Étape 3 - Power On
Using a 24V DC power supply connect the positive and negative rails .
Étape 4 - Faulty ACEpc?
If PC fails to power on, load or operate, label with the fault, date and your initials. This makes sure the PC is not used again.
Étape 5 - Option 4: Format flash FX drive
Étape 6 - Reboot
ctrl alt del
Étape 7 - Option 5: Make FlashFx Drive Bootable
Étape 8 - Remove floppy disk!
Étape 9 - Reboot to test
Draft
Français
English
Deutsch
Español
Italiano
Português