R0015091 Mount Outfeed Beam Sensor

Assembly and fitting details for material clear outfeed sensor assembly

Difficulté

Medium Moyen

Durée

1 hour(s) heure(s)

R0015091_Mount_Outfeed_Beam_Sensor_Screenshot_2023-10-30_074937.png

Introduction

Tools Required

Standard hex key set

Tape measure

Parts Required

D0015546 Reflector Mounting Plate x 1

D0015701 Maytec Post x 2

D0016322 Welded 90° Bracket: 76mm x 38mm x 38mm x 2

E0000279 Spare Reflectors for E0265 x 1

E0001139 Sensor: Outfeed Beam x 1

M0001059 Sensor Mount Bracket E1139 x 1

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connection

Pen mark all fasteners to show finalised

Étape 2 - Assemble reflector assembly

Assemble reflector assembly to include

Right angle bracket x 1

Maytec post x 1

Reflector x 1

Reflector bracket x 1

Endcap x 1

Étape 3 - Assembly Sensor assembly

Assemble sensor assembly to include

Right angle bracket x 1

Endcap x 1

Maytec post x 1

Sensor bracket x 1

Sensor x 1

Étape 4 - Attach reflector assembly

Attach reflector assembly to front buffer beam

Details required for mounting position

Étape 5 - Attach sensor assembly

Attach sensor assembly to rear buffer beam

Details required for mounting position

en none 0 Draft