R0015259 Mount roller beds to mainframe

Fitting details for completed assemblies

Difficulté

Medium Moyen

Durée

2 hour(s) heure(s)

R0015259_Mount_roller_beds_to_mainframe_Screenshot_2023-07-04_094602.png

Introduction

Tools Required

Engineers level

2mm shim plates 2 off

2 meter straight edge

Standard Hex key Set

Standard spanner set

Parts Required

Completed Assemblies

R0015081

R0015090

Étape 1 - Unless otherwise stated

All bolts to have Loctite 243 adhesive applied unless otherwise stated

All Threaded Pneumatic connections to have Loctite 570 applied

All bolts to be pen marked once adhesive applied and correct tension added

Étape 2 - Roller bed Positions

See Pictures for R0015081 and R0015090 roller bed locations

Étape 3 - Attach to Frame

1 Mount assemblies as shown using M8 x 25 socket caps and heavy M8 washers.

Do not apply Loctite 243 at this stage to bolts

Only apply enough tension to fasteners to hold roller assemblies true to the mounting face (Blue section)

2 Attach R0015081 using the same fasteners as above. Ensure the slots are used to align to the other roller bed assemblies as shown

en none 0 Draft