R0015250 Bench Assemble Support Arms : Différence entre versions

[version en cours de rédaction]

Version du 17 juillet 2023 à 14:07

Instructions for bench assembly of support marms

Difficulté

Facile

Durée

5 heure(s)

Instructions for bench assembly of support marms

Difficulté

Facile

Durée

5 heure(s)

Tools Required

Standard hex key set

Standard tap sete

Setting jigs

Parts required

B0001170 Spacer 180 off

B0001155 open rail 18 off

D0015552 Transfer Support arm R/H (right to left machine ) OR D0015553 Transfer Support Arm L/H ( Left to Right machine)

D0015554 x 18

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all bolts to show finalised

Use tap to remove debris build up from coating process in all tapped holes in each support arm

1 Mount 4 off setting jigs to arm on the indicated points

2 align spacers over all m5 holes

1 Use M5 x 25 socket cap and A form washer with loctite 243 to fix rail to arm

2 Ensure rail touching setting jig as indicated and two rails are pushed completely together

2 off per arm

Details of fastener and position required please

Tighten bolts and marked bolts with pen to indicate finished and tight

Repeat for all 9 arms

en none 0 Draft

@@ Ligne 9 : / Ligne 9 : @@
 }}
 {{Introduction
-|Introduction=<translate>Bench assembly instructions for support arms
+|Introduction=<translate>'''<u>Tools Required</u>'''
+Standard hex key set
-Parts required
+Standard tap sete
+Setting jigs
+'''<u>Parts required</u>'''
@@ Ligne 25 : / Ligne 31 : @@
 {{Materials}}
 {{EPI}}
+{{Tuto Step
+|Step_Title=<translate>Unless otherwise stated</translate>
+|Step_Content=<translate>Use Loctite 243 on all fasteners
+Use Loctite 572 on all threaded pneumatic connections
+Pen mark all bolts to show finalised</translate>
+|Step_Picture_00=R0015101_Bench_Assemble_Take_Up_Assembly_Loctite270_stud_lock.png
+}}
 {{Tuto Step
 |Step_Title=<translate>Clean all threads</translate>