R0015345 Conveyor Mounting Brackets : Différence entre versions

[version en cours de rédaction]

Version actuelle datée du 5 juin 2024 à 10:25

Details for fitting of conveyor mounting brackets

Auteur Gareth Green | Dernière modification 5/06/2024 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽

Difficulté

Moyen

Durée

0.5 heure(s)

Details for fitting of conveyor mounting brackets

Difficulté

Moyen

Durée

0.5 heure(s)

Introduction

Tools Required

Standard hex key set

Standard spanner set

Parts required

D0001968 Conveyor Support Bracket x 1

D0001969 Conveyor Foot Mount x 1

M0000516 Adjustable Foot Ø60 M14 x 2

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connection

Pen mark all fasteners to show finalised

R0015086 Assemble Pneumatics on to electrical cabinet loctite 243.png

Étape 2 - Fit adjustable feet

Fit adjustable feet to lower bracket

R0015345 Conveyor Mounting Brackets Screenshot 2023-10-31 152347.png

Étape 3 - Fit lower bracket

Fit lower bracket to conveyor .

Use M6 x 12 socket caps , M6 A Form washers and slim M6 d nuts

Étape 4 - Fit upper bracket

fit upper bracket Use M6 x 12 socket caps , M6 A Form washers and slim M6 d nuts

Commentaires

en none 0 Draft

@@ Ligne 43 : / Ligne 43 : @@
 {{Tuto Step
 |Step_Title=<translate>Fit adjustable feet</translate>
-|Step_Content=<translate>Fit adjustable feet to lower bracket
+|Step_Content=<translate>Fit adjustable feet to lower bracket</translate>
-'''<u>Photos in correct sequence required</u>'''</translate>
 |Step_Picture_00=R0015345_Conveyor_Mounting_Brackets_Screenshot_2023-10-31_152347.png
-|Step_Picture_01=ZX5_Production_R0015122_Module_A_to_R0015139_Module_B_alignment_photorequired.png
 }}
 {{Tuto Step
@@ Ligne 57 : / Ligne 51 : @@
-Use M6 x 12 socket caps , M6 A Form washers and slim M6 d nuts
+Use M6 x 12 socket caps , M6 A Form washers and slim M6 d nuts</translate>
-Provide details for fitting to include position , orientation and holes used
-'''<u>Photos in correct sequence required</u>'''</translate>
 |Step_Picture_00=R0015345_Conveyor_Mounting_Brackets_Screenshot_2023-10-31_152505.png
-|Step_Picture_01=ZX5_Production_R0015122_Module_A_to_R0015139_Module_B_alignment_photorequired.png
 }}
 {{Tuto Step
 |Step_Title=<translate>Fit upper bracket</translate>
-|Step_Content=<translate>fit upper bracket Use M6 x 12 socket caps , M6 A Form washers and slim M6 d nuts
+|Step_Content=<translate>fit upper bracket Use M6 x 12 socket caps , M6 A Form washers and slim M6 d nuts</translate>
-Provide details for fitting to include position , orientation and holes used
-'''<u>Photos in correct sequence required</u>'''</translate>
 |Step_Picture_00=R0015345_Conveyor_Mounting_Brackets_Screenshot_2023-10-31_152628.png
-|Step_Picture_01=ZX5_Production_R0015122_Module_A_to_R0015139_Module_B_alignment_photorequired.png
 }}
 {{Notes}}