|
|
| Ligne 53 : |
Ligne 53 : |
| | | | |
| | This will format the hard drive and then copy all necessary network software as a ZIP file to the hard drive and then inflate it.</translate> | | This will format the hard drive and then copy all necessary network software as a ZIP file to the hard drive and then inflate it.</translate> |
| − | }}
| |
| − | {{Tuto Step
| |
| − | |Step_Title=<translate>Run NetEdit from command prompt</translate>
| |
| − | |Step_Content=<translate>At DOS prompt, ensure you are on drive C: by typing
| |
| − |
| |
| − | <code>c:</code>
| |
| − |
| |
| − |
| |
| − | And press enter
| |
| − |
| |
| − |
| |
| − | type
| |
| − |
| |
| − | <code>netedit</code>
| |
| − |
| |
| − |
| |
| − | And press enter</translate>
| |
| − | }}
| |
| − | {{Tuto Step
| |
| − | |Step_Title=<translate>Set the saw name</translate>
| |
| − | |Step_Content=<translate>Build number must be unique. If a flowline saw put an "s" on the end. i.e. F073S</translate>
| |
| − | }}
| |
| − | {{Tuto Step
| |
| − | |Step_Title=<translate>Saw IP address</translate>
| |
| − | |Step_Content=<translate>This is supplied by customer. IT department
| |
| − |
| |
| − |
| |
| − | <small>''If testing in house it needs to be on the 192.168.16.xxx range.''</small>
| |
| − |
| |
| − | <small>''e.g 192.168.16.101''</small></translate>
| |
| − | }}
| |
| − | {{Tuto Step
| |
| − | |Step_Title=<translate>Multi Name</translate>
| |
| − | |Step_Content=<translate>If this is for a Flowline - Build Number of Flowline machining center
| |
| − |
| |
| − | Otherwise this will be the net NETBEUI name of the pc you are connecting to.
| |
| − |
| |
| − | <small>''For testing at stuga this will be NAS1''</small></translate>
| |
| − | }}
| |
| − | {{Tuto Step
| |
| − | |Step_Title=<translate>Multi IP</translate>
| |
| − | |Step_Content=<translate>If this is for a Flowline - IP Address of Flowline machining center
| |
| − |
| |
| − | Otherwise this will be the IP address of the pc you are connecting to.
| |
| − |
| |
| − | <small>''For testing at stuga this will be 192.168.16.6''</small></translate>
| |
| − | }}
| |
| − | {{Tuto Step
| |
| − | |Step_Title=<translate>Save + Exit</translate>
| |
| − | |Step_Content=<translate>Press escape - then Y
| |
| − |
| |
| − | The message:
| |
| − |
| |
| − | <code>Unable to open params.saw file</code>
| |
| − |
| |
| − | is normal.</translate>
| |
| | }} | | }} |
| | {{Notes}} | | {{Notes}} |
Version du 18 septembre 2019 à 14:14
Using a NetSetGo disk to reformat an ACEpc hard drive and install all the correct software to enable IP address networking
Auteur 
Gareth Green | Dernière modification 25/06/2020 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽
Difficulté
Very easy Très facile
Durée
5 minute(s) minute(s)
Using a NetSetGo disk to reformat an ACEpc hard drive and install all the correct software to enable IP address networking
Difficulté
Very easy Très facile
Durée
5 minute(s) minute(s)
ACEpc, netsetgo, networking
ACE_PC_Re-Flash_20190827_142747.jpg
Introduction
This procedure will completely overwrite any data on the hard drive of the ACEpc.
This is not a problem on a flowline where the data resides on the main MH hard drive in a shared directory c:\saw.
If this process is to be carried out on a standalone saw or router, make sure the data is backed up first.
Étape 1 - Insert disk (Power off)
Power off the machine and insert the NetSetGo disk
Étape 2 - Power On
Switching on with the floppy disk in will boot from the floppy drive instead of the hard drive
Étape 3 - Format Hard Drive and copy Zip
The PC will boot from the floppy disk and you will be prompted
Proceed with format
Press Y
You will then be prompted
Volume label [enter]
Press Enter
This will format the hard drive and then copy all necessary network software as a ZIP file to the hard drive and then inflate it.
en
none
0
Draft
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #
Pas encore enregistré ? Créez un compte pour profiter de toutes les fonctionnalités du service !
Français
English
Deutsch
Español
Italiano
Português