| [version en cours de rédaction] | [version en cours de rédaction] |
m (StugaTrial a déplacé la page Setting Ultrasonic Sensor on infeed Table vers Setting Ultrasonic Sensor - Vertical : Clarification between Horizontal and Vertical) |
|
(Aucune différence)
| |
Version du 12 septembre 2019 à 10:32
How to set ultrasonic sensor on an infeed table
Difficulté
Facile
Durée
2 minute(s)
Vimeo
Étape 1 - Ensure there is 30mm clearance from sensor to profile
If the sensor is closer than 30mm, it will not work
Étape 2 - Press button with profile in place
Hold button in until yellow and green lights flash, let go
Étape 3 - Press Button with profile removed
This sets the longest range of the sensor.
Hold until flashing stops
Étape 4 - Check that it works
Light will come on when object is detected
Draft
Français
English
Deutsch
Español
Italiano
Português