R0015351 Mount monitor to Frame : Différence entre versions

[version en cours de rédaction]

Version actuelle datée du 17 août 2023 à 15:05

Instructions to mount monitor to main frame

Difficulté

Moyen

Durée

1 heure(s)

Instructions to mount monitor to main frame

Difficulté

Moyen

Durée

1 heure(s)

Tools Required

Standard spanner set

Standard hex key set

Parts Required

D0015142 monitor mount post

E0001186 Monitor 32"

M0001060 monitor mount

Use loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all bolts to show finalised

1 slide in monitor mount D0015142 into frame until bottom of post is visible through second set of holes (indicated)

2 Apply tension to M10 x 30 set bolts to pin monitor post and lock tension with the M10 nuts

Attach Monitor mount as shown using M6 x 20 countersink bolts and lock off inside the post with M6 nyloc nuts

Attach Monitor to Bracket using M4 x 12 socket caps and A form washers

en none 0 Draft

@@ Ligne 27 : / Ligne 27 : @@
 {{Materials}}
 {{EPI}}
+{{Tuto Step
+|Step_Title=<translate>Unless otherwise stated</translate>
+|Step_Content=<translate>Use loctite 243 on all fasteners
+Use Loctite 572 on all threaded pneumatic connections
+Pen mark all bolts to show finalised</translate>
+|Step_Picture_00=R0015086_Assemble_Pneumatics_on_to_electrical_cabinet_loctite_243.png
+}}
 {{Tuto Step
 |Step_Title=<translate>Fit mounting post to frame</translate>
@@ Ligne 46 : / Ligne 55 : @@
 {{Tuto Step
 |Step_Title=<translate>Fit Bracket to monitor</translate>
-|Step_Content=<translate>Attach Monitor to Bracket using  (bolts and size Required)</translate>
+|Step_Content=<translate>Attach Monitor to Bracket using M4 x 12 socket caps and A form washers</translate>
 |Step_Picture_00=R0015351_Mount_monitor_to_Frame_Screenshot_2023-06-28_145620.png
 }}