| [version en cours de rédaction] | [version en cours de rédaction] |
| Ligne 8 : | Ligne 8 : | ||
Following and idea generated by a customer, the variable angle capability of the saw can be utilised to cut the rake angle of a VS profile. | Following and idea generated by a customer, the variable angle capability of the saw can be utilised to cut the rake angle of a VS profile. | ||
| − | * A piece that has already been cut with a 90 and 45 degree end is scanned with a barcode reader and loaded back onto the infeed on its large outer side with the square end at the pusher. | + | *A piece that has already been cut with a 90 and 45 degree end is scanned with a barcode reader and loaded back onto the infeed on its large outer side with the square end at the pusher. |
| − | * The pusher moves the bar over the saw blade and then reverses out of the way | + | *The pusher moves the bar over the saw blade and then reverses out of the way |
| − | * The variable angle blade cuts a +/- shallow angle cut on the square end and the piece is ejected | + | *The variable angle blade cuts a +/- shallow angle cut on the square end and the piece is ejected |
<br /> | <br /> | ||
| − | = How it works = | + | =How it works= |
| − | * Profiles that have the ability to be raked cut are identified on the Profile Parameters Tab by setting the vsTilt tickbox (new PeP parameter) | + | *Profiles that have the ability to be raked cut are identified on the Profile Parameters Tab by setting the vsTilt tickbox (new PeP parameter) |
| − | * The barcode reads the batch and piece number and looks up the piece in the 44o file for that batch | + | *The barcode reads the batch and piece number and looks up the piece in the 44o file for that batch |
| − | * The saw angle is calculated by looking at the angle data for the piece (0900, 0450, etc) | + | *The saw angle is calculated by looking at the angle data for the piece (0900, 0450, etc). |
| − | * A single piece temporary batch is created with the same batch number with the correct angle instructions for the saw (uses the same system as the Ecoline single piece batching) | + | *When the main batch is first loaded, any cuts that are 0000, 0900 or lower than 10 degrees (0100) are converted to 0090 in the main 449 / 44o file |
| + | *After barcode scanning and loading as a single piece, each 0090 cut is converted into a slight angle off 90 degrees. The actual angle cut is specified with parameter vsAngle (90 +/- vsAngle) | ||
| + | *A single piece temporary batch is created with the same batch number with the correct angle instructions for the saw (uses the same system as the Ecoline single piece batching) | ||
{{#annotatedImageLight:Fichier:Vertical Slider Rake Cutting on Ancil Saw Batch.png|0=1024px|hash=|jsondata=|mediaClass=Image|type=frameless|align=center|src=https://stuga.dokit.app/images/0/01/Vertical_Slider_Rake_Cutting_on_Ancil_Saw_Batch.png|href=./Fichier:Vertical Slider Rake Cutting on Ancil Saw Batch.png|resource=./Fichier:Vertical Slider Rake Cutting on Ancil Saw Batch.png|caption=|size=1024px}}<br /> | {{#annotatedImageLight:Fichier:Vertical Slider Rake Cutting on Ancil Saw Batch.png|0=1024px|hash=|jsondata=|mediaClass=Image|type=frameless|align=center|src=https://stuga.dokit.app/images/0/01/Vertical_Slider_Rake_Cutting_on_Ancil_Saw_Batch.png|href=./Fichier:Vertical Slider Rake Cutting on Ancil Saw Batch.png|resource=./Fichier:Vertical Slider Rake Cutting on Ancil Saw Batch.png|caption=|size=1024px}}<br /> | ||
=Notes= | =Notes= | ||
Version actuelle datée du 25 juillet 2023 à 15:27
How to set up an Ancil saw for rake cutting
VS Rake Cutting
Following and idea generated by a customer, the variable angle capability of the saw can be utilised to cut the rake angle of a VS profile.
- A piece that has already been cut with a 90 and 45 degree end is scanned with a barcode reader and loaded back onto the infeed on its large outer side with the square end at the pusher.
- The pusher moves the bar over the saw blade and then reverses out of the way
- The variable angle blade cuts a +/- shallow angle cut on the square end and the piece is ejected
How it works
- Profiles that have the ability to be raked cut are identified on the Profile Parameters Tab by setting the vsTilt tickbox (new PeP parameter)
- The barcode reads the batch and piece number and looks up the piece in the 44o file for that batch
- The saw angle is calculated by looking at the angle data for the piece (0900, 0450, etc).
- When the main batch is first loaded, any cuts that are 0000, 0900 or lower than 10 degrees (0100) are converted to 0090 in the main 449 / 44o file
- After barcode scanning and loading as a single piece, each 0090 cut is converted into a slight angle off 90 degrees. The actual angle cut is specified with parameter vsAngle (90 +/- vsAngle)
- A single piece temporary batch is created with the same batch number with the correct angle instructions for the saw (uses the same system as the Ecoline single piece batching)
Notes
- Front end 6.4.97.1
- Barcode Reader
- vsEnable=1
- vsAngle=[rake angle]
- Profiles that use this set VsTilt parameter
- useAngleNotCharacter=true (6.4.98.2 onwards, this is a profile parameter)
See video
https://vimeo.com/694147297/55dc5eab6d
Draft
Français
English
Deutsch
Español
Italiano
Português