R0015271 Mount buffer bars

instructions to mount buffer bars

Difficulté

Medium Moyen

Durée

1 hour(s) heure(s)

R0015077B_Mount_buffer_bars_Screenshot_34.png

Introduction

Tools Required

Standard Hex key set

Parts Required

D0015463 Infeed Front Endfence

D0015464B Infeed Rear Endfence

D0015465 Endfence Spacer - Short

D0015466 Endfence Spacer - Long

Étape 1 - Unless otherwise stated

Use loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all bolts to show finalised

Étape 2 - Check D0015464B Infeed Rear Endfence

Check D0015464B Infeed Rear Endfence has been drilled for m6 countersinks

If not rework and note rework time

Étape 3 - Attach front buffer bar

Attach 3 off D0015465 Endfence Spacer - Short infeed to end of frame . Secure with 3 off m8 x 25 socket caps and heavy M8 washers

Attach D0015463 Infeed Front Endfence to fitted posts and secure with 3 off M8 x 25 socket caps and heavy M8 washers

Étape 4 - Attach rear buffer bar

Attach 3 off D0015466 Endfence Spacer - Long to loader arm with 3 off M8 x 25 socket caps and heavy M8 washers

Mount in place D0015464B Infeed Rear Endfence and secure with M8 x 25 socket caps and heavy M8 washers

Do not apply adhesive or apply final tension to these bolts as end plate will need to be removed in a later stage of build

en none 0 Draft