Create a TwinCAT Project from Scratch

How to create a new TwinCAT3 Project from scratch

Difficulté

Hard Difficile

Durée

4 hour(s) heure(s)

TwinCAT3, Project, New

Étape 1 - Start a new project

1. Open Visual Studio
2. Click on New project
3. Choose TwinCAT projects->TwinCAT XAE Project (xml format)
4. Name is build number (no Suffix)
5. Location is c:\TwinCAT\Stuga\
6. Untick "Create Directory for solution"

This creates the template

Étape 2 - Add PLC Project for Reset

1. Add Existing Item
2. Navigate to g:\Design\TwinCAT3\PLC_Reset_1_1
3. Select the .Plcproj file
4. Copy Project to solution file

Étape 3 - Add PLC Project for tcMulti

1. Add Existing Item
2. Navigate to g:\Design\TwinCAT3\tcMulti_6_24
3. Select the .Plcproj file
4. Copy Project to solution file

Étape 4 - Add TwinSAFE project

...From Z071 there is no twinSAFE project as the Estop circuit is hard wired

Étape 5 - Add the route to the PLC

1. From Dropdown box select the Build number (If it does not exist we will need to add a new route)
2. If there is a request for a platform change, click Yes
3. On success, the Route dropdown will not read Error

Étape 6 - Scan for Devices

1. Expand IO
2. Right click on devices, Scan
3. Untick RT-Ethernet
4. Untick COM-Port
5. Just have the EtherCAT ports
6. Scan for boxes - Yes
7. If there is a request for New Device Type, Click Apply to All, Click Yes
8. Check the Devices and boxes match the expected EtherCAT setup

Repeat this until the physical network matches the scanned network

...Check the green lights on the etherCAT boxes for connection status. Flickering Green means it is OK

en none 0 Draft