ACEpc Installing netedit with NetSetGo disk : Différence entre versions

[version en cours de rédaction]

Version du 18 septembre 2019 à 13:41

Using a NetSetGo disk to reformat an ACEpc hard drive and install all the correct software to enable IP address networking

Auteur Gareth Green | Dernière modification 25/06/2020 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽

Difficulté

Très facile

Durée

5 minute(s)

Using a NetSetGo disk to reformat an ACEpc hard drive and install all the correct software to enable IP address networking

Difficulté

Très facile

Durée

5 minute(s)

Sommaire

1 Introduction
2 Étape 1 - Insert disk (Power off)
3 Étape 2 - Power On
4 Étape 3 - Proceed with format Y
5 Étape 4 - Run NetEdit from command prompt
6 Étape 5 - Set the saw name
7 Commentaires

ACEpc, netsetgo, networking ACE_PC_Re-Flash_20190827_142747.jpg

Introduction

This procedure will completely overwrite any data on the hard drive of the ACEpc.

This is not a problem on a flowline where the data resides on the main MH hard drive in a shared directory c:\saw.

If this process is to be carried out on a standalone saw or router, make sure the data is backed up first.

Étape 1 - Insert disk (Power off)

Étape 2 - Power On

Étape 3 - Proceed with format Y

Volume label [enter]

This will format the hard drive and then copy all necessary network software as a ZIP file to the hard drive and then inflate it.

Étape 4 - Run NetEdit from command prompt

At DOS prompt, ensure you are on drive C: by typing

c:

And press enter

type

netedit

And press enter

Étape 5 - Set the saw name

Commentaires

en none 0 Draft

@@ Ligne 3 : / Ligne 3 : @@
 |Main_Picture_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","originY":"top","left":-226,"top":-3,"width":4032,"height":2268,"fill":"rgb(0,0,0)","stroke":null,"strokeWidth":0,"strokeDashArray":null,"strokeLineCap":"butt","strokeDashOffset":0,"strokeLineJoin":"miter","strokeMiterLimit":4,"scaleX":0.29,"scaleY":0.29,"angle":0,"flipX":false,"flipY":false,"opacity":1,"shadow":null,"visible":true,"clipTo":null,"backgroundColor":"","fillRule":"nonzero","paintFirst":"fill","globalCompositeOperation":"source-over","transformMatrix":null,"skewX":0,"skewY":0,"crossOrigin":"","cropX":0,"cropY":0,"src":"https://stuga.dokit.app/images/0/0c/ACE_PC_Re-Flash_20190827_142747.jpg","filters":[]}],"height":449.76377952755905,"width":600}
 |Description=<translate>Using a NetSetGo disk to reformat an ACEpc hard drive and install all the correct software to enable IP address networking</translate>
-|Categories=Operation
+|Categories=Software
 |Difficulty=Very easy
 |Duration=5
@@ Ligne 21 : / Ligne 21 : @@
 {{EPI}}
 {{Tuto Step
-|Step_Title=<translate></translate>
+|Step_Title=<translate>Insert disk (Power off)</translate>
+|Step_Content=<translate></translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Power On</translate>
+|Step_Content=<translate></translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Proceed with format Y</translate>
+|Step_Content=<translate>Volume label [enter]
+This will format the hard drive and then copy all necessary network software as a ZIP file to the hard drive and then inflate it.</translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Run NetEdit from command prompt</translate>
+|Step_Content=<translate>At DOS prompt, ensure you are on drive C: by typing
+<code>c:</code>
+And press enter
+type
+<code>netedit</code>
+And press enter</translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Set the saw name</translate>
 |Step_Content=<translate></translate>
 }}