(Page créée avec « {{Tuto Details |Main_Picture=R0015340_Drill_Assemble_and_Mount_Electrical_Cabinet_Screenshot_2023-11-02_091116.png |Main_Picture_annotation={"version":"2.4.6","objects":[{... ») |
(Aucune différence)
|
Version du 2 novembre 2023 à 10:34
Details for final mounting of electrical cabinet
Difficulté
Moyen
Durée
0.5 heure(s)
Introduction
Tools Required
External circlip pliers
Standard hex key set
Parts Required
Pre assembled electrical cabinet
Étape 1 - Unless otherwise stated
Use Loctite 243 on all fasteners
Use Loctite 572 on all threaded pneumatic connection
Pen mark all fasteners to show finalised
Étape 2 - Attach frame braces
attach frame braces and finalise Fasteners
Étape 3 - Position Cabinet
Position assembled cabinet onto braces
Étape 4 - Fit cabinet pins
Fit cabinet pins and fit 20mm external circlips
Étape 5 - Check operation
Check cabinet fully closes and opens
Ensure locking ;points are aligned and useable
Draft
Français
English
Deutsch
Español
Italiano
Português