Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• *Ensure regional settings correct - corre … *Ensure regional settings correct - correct date format *Rename the Ethernet Adaptors to Ethernet and EtherCAT *Ensure the [https://stuga.dokit.app/wiki/TwinCAT_Issue_-_EtherCAT_Network_Protocol_Missing TwinCAT Protocol is installed] on the EtherCAT adaptor *Teamviewer setup *Administrator password set to "Stuga001" *Add Stuga desktop image *Latest winMulti in c:\multi desktop image *Latest winMulti in c:\multi   +
• *Ensure the 6015 PC has been earthed adequately   +
• Check inverter is wired so that OK=high on … Check inverter is wired so that OK=high on X90 Check alarms trigger on low signal on inverter ok Check 50Hz and 300Hz spindles function correctly from SpindleIO screen
  ...A lot of the older machines were released with inverter OK active low, and the alarms file set up to "bodge" around this. The "correct" way should be active high which means it is also fail safe. Take this opportunity to ensure the machine is correct
  
  safe. Take this opportunity to ensure the machine is correct</div> </div><br/>  +
• Ensure: autoQueue=1 sawSYType=1<br/>allWasteAtStart=1 throwaway=230 throwawayChunkSize=120 throwawayMaxChunk=100 throwawayMinChunk=100 throwawayEjectAtStart=1 storeOffcuts=0 <br/>  +
• Follow standard [https://stuga.dokit.app/wiki/Create_a_TwinCAT_Project_from_Scratch Setup procedure] to step 5 to ensure sourcetree installed with latest tc3Multi software pulled to machine  +
• Map the network drives Map customer network connections  +
• The software highlighted a bug in the calc … The software highlighted a bug in the calculation for the saw cutting speed which has now been corrected. Saw cut speeds should be checked if they are not default.
  ...The old software calculated the percentage based on the cut height, not the speed! It was not noticed because the cut height would be around 70-150mm (70-150%) so would not look excessively fast or slow
  und 70-150mm (70-150%) so would not look excessively fast or slow</div> </div>  +
• This is important to ensure there have been no mistakes in the remapping  +
• [https://stuga.dokit.app/wiki/Convert_Auto … [https://stuga.dokit.app/wiki/Convert_Autoflow_TC2_Project_to_TC3 Follow this procedure] to convert the project Map the Saw On, Conveyor and extractor as outputs rather than invertergofwd links (outputs 97 and 98) '''''[ASK GG if not clear on this - it is confusing}''''' Ensure the PLC projects are in the correct ports 851- tc3multi 852 - PLC_Resetrect ports 851- tc3multi 852 - PLC_Reset  +