Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Fit 1 length of trunking as shown. Fix with M5 x 10 button sockets and penny washers Remove sections shown to align with cutout on side sheet  +
• All bolts to have Loctite 243 adhesive applied unless otherwise stated All Threaded Pneumatic connections to have Loctite 570 applied All bolts to be pen marked once adhesive applied and correct tension added  +
• Assemble air gun assembly to bulk head fitting and fit to air gun bracket  +
• Connect 8mm red pipe between air gun regulator and airgun bulkhead  +
• Cut a section of trunking to fit into area as shown  +
• Fit D0004391E Left hand side sheet Use M6 x 12 socket caps and M6 A form washers Use 2 off M6 x 10 Counter sunk for top 2 fixing points  +
• Fit ethercat box to mounting plate using M … Fit ethercat box to mounting plate using M3 x 25 socket caps , M3 A form washers and M3 nuts Fit ethercat mounting plate to side sheet at position shown , holes will require drilling to suit. Use M6 x 12 socket caps and penny washers, and back off with M6 A form washers and Dome nuts ECR generated to add holes to side sheet for fixing 18/12/23 Use attached drawing to add holes until ECR processedd drawing to add holes until ECR processed  +
• Fit regulator bracket to side sheet using 2 off M5 x 12 socket caps and A form washers  +
• Fix cabinet to frame using M8 x 70 socket caps, heavy M8 washers and nyloc nuts  +
• Mark and drill 2 off M5 tapped holes to suit air gun bracket . Position 15mm as shown from edge of frame Fix with 2 off M5 x 12 socket caps and M5 motor plate washer  +
• Mark and drill pre cut trunking to fit as shown . Fix with M5 x 10 button sockets, penny washers and back off with M5 A forms and dome nuts  +
• Position cabinet as shown, aligning edges  +
• assemble regulator and fit to bracket as shown  +