Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 retract indicated backfences in the direction shown to maxuimum movement in slot 2 Check positions shown are middle slot  +
• 1 Mount D0015420 M/C Infeed Backfence Plate to D0015468 Infeed Backfence Bracket as shown 2 position at middle slot as shown Use 2 off M6 x 12 Socket cap and A form washers to fix parts together Do not add adhesive at this stage  +
• 1 Mount assembled backfences to frame in … 1 Mount assembled backfences to frame in position shown on each loader arm (parts removed for clarity ) Use M6 x 16 Socket caps with m6 penny washers to fix 2 Set height to be as shown 3 Ensure back fence is vertical and at 90 degrees to green runner stripal and at 90 degrees to green runner strip  +
• All bolts to have Loctite 243 adhesive applied unless otherwise stated All Threaded Pneumatic connections to have Loctite 570 applied All bolts to be pen marked once adhesive applied and correct tension added  +
• Connect mains air to module to allow setting of roller beds  +
• Sign off required once alignment is complete  +
• Use dokit [[Alignment guide using wire line]] … Use dokit [[Alignment guide using wire line]] for correct process Set wire line between 1st and last backfence and adjust middle 7 to correct position Once aligned , add adhesive to all bolts one at a time Check that no movement occurs when finalising fixingsno movement occurs when finalising fixings  +