Rechercher dans les propriétés de la page

Cette page fournit une interface de navigation pour trouver toutes les valeurs d’une propriété et une page donnée. D’autres interfaces de recherche disponibles incluent la recherche de propriété, et le constructeur de requête ask.

Liste de résultats

• 1 Use 2 off M10 x 40 Countersunk bolts to … 1 Use 2 off M10 x 40 Countersunk bolts to centralise position of bearing block 2 Add 2 off M10 x 20 socket cap and fix in two holes indicated and tighten. 3 Replace M10 counter sunk bolts with another 2 off M10 x 20 socket caps repeat for all bearing mounting positions repeat for all bearing mounting positions  +
• 1 Bearings should be located as shown on each arm 2 Grease nipples to face each other as shown  +
• 1 Shafts need to be correctly orientated 2 Each arm should have a key positioned as shown for drive pinions <br/>  +
• 1 Shafts should be slid through bearing bl … 1 Shafts should be slid through bearing blocks to install. Drive pinions should be added to shaft between each arm as the shaft is fitted. 2 B0001165 2 off drive sprockets will also require adding to shafts as they are fitted . See images for location 3 B0001165 should be orientated as shown
  ...Do not fix any pinions into position, leave floating on shafts Do not fix any bearing grubscrew lock points
  
  ting on shafts Do not fix any bearing grubscrew lock points</div> </div><br/>  +
• Couple shafts together with 1 off B0001153 shaft couplers and 2 off B0001100 key per shaft  +
• Use Loctite 243 on all fasteners Use Loctite 572 on all threaded pneumatic connections Pen mark all bolts to show finalised  +
• all bearings should be lubricated with grease gun and trojan grease  +
• fit 20 off keys to relevant keyways and slide 18 drive pinions and 2 off drive sprockets into approximate positions  +